Instruction manual

NGA 2000 MLT Hardware
TECHNICAL DESCRIPTION
1 - 2
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
Fig. 1-1: Operation front panel, Front view
OPERATING FRONT PANEL: STANDARD VERSION
1.3 Operating Front Panel
1.3.1 Standard Version
The front panel of the analyzer is the operating front panel (see Fig. 1-1).
Measured values and the entire operating procedure are displayed on a LC display. The operation
and programming of the instrument is performed by using the four cursor keys, the ENTER key
and the five soft keys
For analyzer modules there is mounted a blind plate instead of an operation front panel.
Fastening screws for rack mounting or carrying-strap bracket
ENTER key
LC display
Cursor keys
Soft keys
(function is depending on Software Menu)
Fastening screws for rack mounting or carrying-strap bracket