Instruction manual

P - 7
NGA 2000 MLT Hardware
PREFACE
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
12/2006
Table P-1: Possibilities of NGA 2000 MLT I/O combinations
System Unit SIO/DIO Configuration
MLT analyzer module (AM):
• without front panel,
i.e. "blind" without control unit
• can be combined with
a platform,
a MLT analyzer,
a TFID analyzer or
a customer developed control unit
⇒ 1 local SIO and 1 local DIO
(or 2 local DIO’s) can be installed in
the MLT analyzer module
⇒ SIO and DIO can be configured
for the MLT AM channels module
only
Platform (Control Module Software):
• Control unit with front panel
• Without measurement channels
⇒ 1 SIO and up to 4 DIO's (or 5 DIO's)
can be installed in the platform
(CM I/O’s)
⇒ SIO and DIO can be configured
for all MLT channels & AM’s
combined with the platform
MLT analyzer
(CM plus MLT AM software = MCA software):
• Analyzer with front panel
• CM and AM software in the same analyzer,
i.e. all functions of the control unit and of
the AM are combined in one controller
board
⇒ 1 SIO and 1 DIO (or 2 DIO’s) can be
installed in the MLT analyzer
(CM I/O)
⇒ SIO and DIO can be configured
for all MLT channels & AM’s
combined with the MLT analyzer