Instruction manual

NGA 2000 MLT Hardware
PIN ASSIGNMENTS
21 - 4
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
21.5 Terminal Assignment of CAT 200
CAT 200
Fig. 21-6: CAT 200, Junction box, interior view
1 Cable gland mains
2 Mains terminals
3 Upper signal terminals (24)
4 Lower signal terminals (24).
5 Signal cable glands (max. 3)
1 2435
124
241
15
Note!
Assignment of signals to signal terminals inside junction box varies depending on selected analyzer
options. For assignments of your specific analyzer refer to the label on the inner side of the junction
box cover.
General terminal assignments (examples) for the different kinds of available signals are given on the
following pages.