Instruction manual

NGA 2000 MLT Hardware
TECHNICAL DATA
20 - 16
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
20.4.2.3 External 10A Power Supply Unit for DIN Rail Installation
This power supply unit may be ordered for supplying analyzers installed in a rack, where mounting
the power supply on a DIN rail is required.
Model designation SL10
Input
Rated input voltage (manual switch) 100-120 / 220-240 V 50/60 Hz
Input voltage range 85 - 132 / 176 - 264 V , 47 - 63 Hz
Rated input current < 6 A (switch at 115 V position)
< 2.8 A (switch at 230V position)
Input Screw terminals at front (left side)
Output
Rated voltage 24 V (+ 5 %, -1 %)
Output current max. 10 A
Output Screw terminals at front (right side)
Efficiency
Efficiency typ. 89 % (230 VAC, 24 V / 10 A)
Losses typ. 29 W (230 VAC, 24 V / 10 A)
Protection Measures
Overload protection against short circuit, overload and
open circuit
Overtemperature protection Derating > 60° C
Design and Installation
Weight approx. 1.2 kg
Dimensions (w x h x d) 120 mm x 124 mm x 102 mm
Spacing for cooling above / below 25 mm each
left / right sides 15 mm each
Compliances
Electrical safety EN 60950, EN 50178, UL1950,
CSA22.2 Nr. 234-M90
Electromagnetic compatibility EN 50081-1, class B (emission)
EN 50082-2, class A (immunity)
and others
POWER SUPPLIES: EXTERNAL 10A POWER SUPPLY FOR DIN RAIL INSTALLATION