Instruction manual

NGA 2000 MLT Hardware
OPENING OF HOUSING
15 - 4
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
15.1.2 MLT 1 (1/2 19" housing)
15.1.2.1 Housing Cover
❍ Disconnect all voltage supplies.
❍ Unscrew fastening screws for rack mounting / front frame if necessary (Fig. 1-1).
Remove analyzer out of rack or remove the front mounting frame and carrying strap to rear.
❍ Unscrew the respective fastening screws at both housing sides (Fig. 15-3)
❍ Remove the respective housing top cover panel.
Repeat above steps in reverse order to assemble the housing
Fig. 15-3: MLT 1 (1/2 19" housing)
(Fastening screws housing cover)
MLT 1 (1/2 19" HOUSING)
fastening screws housing cover