Instruction manual

NGA 2000 MLT Hardware
SAFETY INSTRUCTIONS
S - 4
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
INTENDED USE STATEMENT / SAFETY SUMMARY / AUTHORIZED PERSONNEL
Intended use statement
MLT and CAT200 series gas analyzers/analyzer modules are intended to be used as
analyzers for industrial purposes. They must not be used in medical, diagnostic or life
support applications, and no independent agency certifications or approvals are to be
implied as covering such applications!
Safety summary
If this equipment is used in a manner not specified in these instructions, protective
systems may be impaired.
Authorized personnel
To avoid loss of life, personal injury and damage to this equipment and on-site property,
do not operate or service this instrument before reading and understanding this
instruction manual and receiving appropriate training. Save these instructions.
ELECTRICAL SHOCK HAZARD !
Do not operate without covers secure. Do not open while energized. Installation requires
access to live parts which can cause death or serious injury.
For safety and proper performace this instrument must be connected to a properly
grounded three-wire source of power.
TOXIC GASES !
This unit’s exhaust may contain toxic gases such as sulfur dioxide.
These gases can cause serious injuries.
Aviod inhalation of the exhaust gases at the exhaust fitting.
Connect exhaust outlet to a safe vent. Check vent line and connections for leakage.
Keep all fittings tight to avoid leaks. See section 14 for leak test information.