Instruction manual

NGA 2000 MLT Hardware
OPENING OF HOUSING
15 - 2
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
15.1 MLT 1
15.1.1 MLT 1 (Platform housing)
15.1.1.1 Housing Cover
❍ Disconnect all voltage supplies.
❍ Remove analyzer module out of platform (see platform manual).
❍ Unscrew the respective fastening screws at both housing sides (Fig. 15-1).
❍ For rear cover unscrew the additonal fastening screw at the top of the housing (Fig. 15-1)
❍ Remove the respective housing top cover panel.
Repeat above steps in reverse order to assemble the housing
Fig. 15-1: MLT 1 (Plattform housing)
(Fastening screws housing cover)
MLT 1 (PLATFORM HOUSING)
Fastening screw,
front housing cover
Top fastening screws,
rear housing cover
Fastening screw,
rear housing cover