Instruction manual

NGA 2000 MLT Hardware
REMOVAL / REPLACEMENT OF COMPONENTS
12 - 9
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
Connect the two white grounding cables to the UV source.
❍ One grounding cable comes from power supply for UV source .
❍ The 2
nd
grounding cables comes from PCB ESP10 (part no. 43002530).
❍ Connect both cables to the UV lamp (connection point) as indicated below.
Fig. 12-4b: UV Source and PCB ESP10 (top view, housing cover disassembled)
CONNECT/DISCONNECT UV SOURCE AND POWER SUPPLY FOR UV SOURCE
PCB ESP10 UV Source
Cable from UV source to UV power supply
Connection point at UV source