Instruction manual

NGA 2000 MLT Hardware
REMOVAL / REPLACEMENT OF COMPONENTS
12 - 8
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
CONNECT/DISCONNECT UV SOURCE AND POWER SUPPLY FOR UV SOURCE
Fig. 12-4a: Power Supply for UV Source (front view, front panel disassembled)
❍ Open the front panel / remove cover from MLT housing (cf. Section 15).
❍ Take the cable from the UV source (part no. 42711213) out of the thermostat controlled
compartment to the power supply for UV source located behind the removed front panel
❍ Plug in the cable from UV source on the connector on top of the power supply for UV
source (part no. 42715072).
Plug in cable from UV sourcePower Supply for UV Source