Instruction manual

NGA 2000 MLT Hardware
SAFETY INSTRUCTIONS
S - 3
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
OPERATING AND MAINTAINING THIS APPARATUS
Operating and maintaining this apparatus
This instrument has left the factory in compliance with all applicable safety regulations.
To maintain this operating condition, the user must strictly follow the instructions and consider
the warnings in this manual or provided on the instrument.
Before switching on the instrument, verify that the electrical supply voltage matches the
instrument´s operating voltage as set in the factory.
Any interruption in the instrument´s ground line, whether inside or outside the instrument, or
removal or interruption of its ground line connection, could result in hazardous operating
conditions. Intentionally interrupting the instrument´s protective ground is strictly prohibited.
Opening cover panels could expose voltage-carrying components. Connectors may also be
under voltage. The instrument must be disconnected from all electrical supplies before
attempting any calibrations, maintenance operations, repairs or component replacements
requiring opening of the instrument. Any calibrations, maintenance operations, or repairs that
need the instrument to be opened while connected to electrical supplies should be subject to
qualified technicians familiar with the hazards involved only!
Use only fuses of the correct type and current ratings as replacements. Using repaired fuses
and short circuiting of fuse holders is prohibited.
Observe all applicable regulations when operating the instrument from an auto-transformer
or variac.
Substances hazardous to health may emerge from the instrument‘s exhaust.
Please pay attention to the safety of your operation personnel. Protective measures must be
taken, if required.