Instruction manual

NGA 2000 MLT Hardware
REMOVAL / REPLACEMENT OF COMPONENTS
12 - 2
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
12.2 Removal / Replacement of Operation Front Panel
Front panel plate together with LC display and circuit board AFP 01 constitutes an unit. Therefore,
the front panel has to be disassembled completely when one component of the unit is out of order.
Take care of the safety instructions as given at the beginning of this manual
while working at and inside the instruments!
Working inside the instruments is subject to briefed personnel familiar with
potential risks!
❍ Open the front panel / housing (cf. Section 15).
❍ Remove the cable (ACU - AFP 01 connection) from the circuit board ACU.
❍ Remove all optional mounted components from front panel.
❍ Exchange complete front panel unit .
❍ Assemble all optional mounted components to new front panel.
❍ Re-attach the cable (ACU - AFP 01 connection) to the circuit board ACU.
❍ Close the instrument (i.e., re-attach the front panel, see section 15.).
REMOVAL / REPLACEMENT OF OPERATION FRONT PANEL