Instruction manual

NGA 2000 MLT Hardware
INSTALLATION
5 - 30
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
ANALYZER SPECIFIC INSTRUCTIONS: CAT 200
Note!
For information about terminal assignments see section 21.5).
Fig. 5-20: CAT 200, Junction box, interior view
1 Threat for mains cord cable gland
2 Mains screw terminals
3 Mains EMC filter
4 Flameproof feed thru, mains
5 Flameproof feed thru, signals (3x)
6 Upper signal screw terminals (24)
7 Lower signal screw terminals (24)
8 Threats for signal cables cable glands (3x)
1 234 5 678
124
241
15