Instruction manual
Table Of Contents
- INSTRUCTION MANUAL HFID
- ESSENTIAL INSTRUCTIONS
- TABLE OF CONTENTS
- PREFACE
- DEFINITIONS
- SAFETY INSTRUCTIONS WIRING AND INSTALLATION OF THIS APPARATUS
- OPERATING AND MAINTAINING THIS APPARATUS
- GENERAL SAFETY NOTICE / RESIDUAL RISK
- AUTHORIZED PERSONNEL
- GASES AND GAS CONDITIONING (SAMPLE HANDLING)
- POWER SUPPLY
- ELECTROSTATIC DISCHARGE
- GENERAL PRECAUTIONS FOR HANDLING AND STORINGHIGH PRESSURE GAS CYLINDERS
- DOCUMENTATION
- COMPLIANCES
- GLOSSARY OF TERMS
- ANALYZER SYSTEM ARCHITECTURE
- SECTION 1: DESCRIPTION AND SPECIFICATIONS
- SECTION 2: INSTALLATION
- SECTION 3: OPERATION
- SECTION 4: MAINTENANCE AND SERVICE
- SECTION 5: TROUBLESHOOTING
- SECTION 6: REPLACEMENT PARTS
- RETURN OF MATERIAL
- LIST OF FIGURES AND TABLES
- SUPPLEMENT
NGA 2000 HFID
Instruction Manual
HAS64E-IM-HW
September 2008
3 - 10 Operation Emerson Process Management GmbH & Co.OHG
External physical parameters are adjusted as follows
The following parameters can be checked in menu "Physical Measurements"
Operation:
Main Menu...
Expert Controls and Setup...
Analyzer Module Setup...
Physical Measurements...
Internal physical parameters are adjusted as follows
Oven Temperature
226
9,7 cc/min @ 3,5 psig
4560
75,2
Sample Temperature
cc/min
Bypass Flow
cc/min
°C
°C
cc/min
°C
°C
cc/min
°C
°C
190
Flame Temperature
psig
psig
691,00
hPa
10,02
148,7
hPa
15,10
Capillary Flow Rate
Sample Pressure
Purge Gas Pressure
Reference Temperature
191
Fuel Gas Flow
56,4
50,0
1041,00
psig
2000,00
hPa
29,01
psig
hPa
50,763500,00
hPa
23,82
hPa
1642,00
hPa
hPa
253,00
hPa
8,70
Supply Pressure Sample Gas
600,00
psig
psig
psig
10,02
cc/min
3,67
psig
psig
10,15
no sensor
472,5
691,00
Supply Pressure Fuel Gas
700,00
Fuel Gas Pressure
Burner Air Pressure
Sample Flow
Case Temperature
Burner Air Flow
Preamp Temperature
Supply Pressure Purge Gas Min.
Supply Pressure Burner Air
Supply Pressure Regulated Air (N2)
Figure 3-12: Excerpt of a Test Data Sheet with values that are to be compaired with physical measurements