Instruction manual
Table Of Contents
- INSTRUCTION MANUAL HFID
- ESSENTIAL INSTRUCTIONS
- TABLE OF CONTENTS
- PREFACE
- DEFINITIONS
- SAFETY INSTRUCTIONS WIRING AND INSTALLATION OF THIS APPARATUS
- OPERATING AND MAINTAINING THIS APPARATUS
- GENERAL SAFETY NOTICE / RESIDUAL RISK
- AUTHORIZED PERSONNEL
- GASES AND GAS CONDITIONING (SAMPLE HANDLING)
- POWER SUPPLY
- ELECTROSTATIC DISCHARGE
- GENERAL PRECAUTIONS FOR HANDLING AND STORINGHIGH PRESSURE GAS CYLINDERS
- DOCUMENTATION
- COMPLIANCES
- GLOSSARY OF TERMS
- ANALYZER SYSTEM ARCHITECTURE
- SECTION 1: DESCRIPTION AND SPECIFICATIONS
- SECTION 2: INSTALLATION
- SECTION 3: OPERATION
- SECTION 4: MAINTENANCE AND SERVICE
- SECTION 5: TROUBLESHOOTING
- SECTION 6: REPLACEMENT PARTS
- RETURN OF MATERIAL
- LIST OF FIGURES AND TABLES
- SUPPLEMENT
NGA 2000 HFID
Instruction Manual
HAS64E-IM-HW
September 2008
A - 4 Analyzer System Architecture Emerson Process Management GmbH & Co.OHG
Table A-1: Possibilities of NGA 2000 I/O combinations
System unit SIO/DIO-Configuration
CLD/FID/HFID analyzer module (AM):
• without front panel,
i.e. without control unit (host)
• can be combined with
a platform,
a MLT analyzer,
a TFID analyzer;
a CAT 200 analyzer or
a customer developed control unit
• No local CLD/FID/HFID I/O’s
Platform (Control Module Software):
• Control unit with front panel
• Without measurement channels
• 1 SIO and up to 4 DIO's (or 5 DIO's)
can be installed in the platform
(CM I/O’s)
• SIO and DIO’s can be configured
for all AM channels connected to the
platform
HFID analyzer
• HFID analyzer module into a platform with
front panel
• HFID analyzer module combined with
MLT/TFID/CAT 200 analyzer
• 1 SIO and 4 DIO’s (or 5 DIO’s) can be
installed in the platform
• 1 SIO and 1 DIO (or 2 DIO’s) can be
installed in the MLT/TFID/CAT 200
analyzer (CM I/O)
• SIO and DIO can be configured
for all AM’s connected to the
MLT/TFID/CAT 200 analyzer