Instruction manual

NGA 2000 HFID
Instruction Manual
HAS64E-IM-HW
September 2008
P - 4 Preface Emerson Process Management GmbH & Co.OHG
GENERAL SAFETY NOTICE / RESIDUAL RISK
If this equipment is used in a manner not specified in these instructions, protective systems may be
impaired.
Despite of incoming goods inspections, production control, routine tests and application of state-of-
the-art measuring and test methods, an element of risk remains when operating a gas analyzer!
Even when operated as intended and observing all applicable safety instructions some residual risks
remain, including, but not limited to, the following:
• An interruption of the protective earth line, e.g. in an extension cable, may result in risk to the
user.
• Live parts are accessible when operating the instrument with doors open or covers removed.
• The emission of gases hazardous to health may even be possible when all gas connections
have been correctly made.
Avoid exposure to the dangers of these residual risks by taking particular care when ins-talling, oper-
ating, maintaining and servicing the analyzer.
AUTHORIZED PERSONNEL
In-depth specialist knowledge is an absolutely necessary condition for working with and on the unit.
Authorized personnel for installing, operating, servicing and maintaining the analyzer are instructed
and trained qualified personnel of the operating company and the manufac-turer.
It is the responsibility of the operating company to
• train staff,
• observe safety regulations,
• follow the instruction manual.
Operators must
• have been trained,
• have read and understood all relevant sections of the instruction manual before commencing
work,
• know the safety mechanisms and regulations.
To avoid personal injury and loss of property, do not install, operate, maintain or service this instru-
ment before reading and understanding this instruction manual and receiving appropriate training.
Save these instructions.