Instruction manual

Instruction Manual
760006-A
September 2001
6-16 System Configuration and Diagnostics Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
6-10 LOAD/SAVE MODULE CONFIGURATION
This menu provides several functions to send
or load configuration data of the Platform
through the serial interface. These functions
are only available if an SIO with serial inter-
face is installed.
NOTE
When loading configuration data all
of the current configuration in the
memory will be overwritten.
Figure 6-13. Load/Save Module Configuration (CM/MCA) Menu
Send configuration to serial interface !
The configuration data in memory will be sent
through the serial interface of the Analyzer to
an external computer or other device.
Load configuration data from serial inter-
face !
Configuration data will be loaded into memory
from an external computer or other device
through the serial interface of the Analyzer.
The current configuration in memory will be
overwritten.
Replace current configuration with factory
settings !
Deletes the configuration in memory and re-
establishes the factory default setting from the
Flash-EPROM.
In the System Configuration and
Diagnostics menu, use the ↑ ↓ keys to go to
Load/Save configuration (CM/MCA)… and
press the ↵ (Enter) key.
The Load/Save Configuration (CM/MCA)
menu screen is displayed. Use the ↑ ↓ keys
to go to the desired function line and press
the ↵ (Enter) key. If asked, confirm with the
Yes (F2) key or cancel and go back to the
menu page with the Back! (F4) key.
CLD 7.50 ppm
-- Load/Save Confi
g
uration
(
CM/MCA
)
--
Abort
Send configuration to serial interface!
Load configuration from serial interface!
-- BE CAREFUL with this function --
Replace current configuration with factory settings!
Back!
CLD 7.50 ppm
-- S
y
stem Confi
g
uration and Dia
g
nostics --
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
Pump 1: Off
Pump 2: Off
System tag: Fisher-Rosemount
Measure
Back…
Channel
Main Menu
↓
System configuration and diagnostics…