Specifications
Table Of Contents
- 1.0 System Overview
- 2.0 Product Description
- 2.1 Application Software
- 2.2 Custom Software Development
- 2.2.1 SITECONFIG-SVC - SiteScan Configuration Service Agreement
- Additional Benefits
- HIGRAPHIC - Create a Graphic
- HIGRAPHICM - Modify a Graphic
- HIGRAPHICUP - Upgrade SS2000W Graphic to SSWeb Java-Based Graphic (1)
- HIGRAPHICUP-5 - Upgrade SS2000W Graphics to SSWeb Java-Based Graphics (2-5)
- TEXTMOD - Customized Modifications
- MODCONFIG-4 - Modbus Configuration
- MODCONFIG-12 - Modbus Configuration
- BACCONFIG-4 - BACnet Configuration
- BACCONFIG-12 - BACnet Configuration
- 2.2.1 SITECONFIG-SVC - SiteScan Configuration Service Agreement
- 2.3 Gateway Modules
- 2.4 SiteLink Modules
- 2.5 Site I/O Modules
- 2.6 Stand-Alone Monitoring Modules
- 2.7 Module Accessories
- 2.8 ARCnet Communication Enhancement Devices
- 2.8.1 ARC156-KIT - ARCnet Kit
- 2.8.2 Other ARCnet Parts
- ARCDIAG485 - ARCnet156 Diagnostics Board
- ARCDIAG485WO - ARCnet156 Diagnostics Board Without Enclosure
- ARCPROT485 - ARCnet156 Surge Protection Board
- ARCPROT485WO - ARCnet156 Surge Protection Board Without Enclosure
- ARCREP485 - ARCnet156 Repeater Board (Signal Booster)
- ARCREP485WO - ARCnet156 Repeater Board Without Enclosure
- 2.9 Third-Party Interfaces
- 3.0 Application and Configuration
- 4.0 Upgrading SiteScan 2000 Systems to SiteScan Web
- 5.0 Third-Party and Building Management Interfaces
- 5.1 SiteScan Web and BACnet/IP to BMS
- 5.2 BACnet/IP to BMS Without a SiteScan Web Front-End
- 5.3 BMS Front-End Interfacing to Liebert Equipment by EIA-485 Modbus
- 5.4 SiteTPI-E with OpenComms NIC (or OpenComms 485)
- 5.5 Basic SiteTPI-E with Third-Party Equipment
- 5.6 SiteTPI-E and Third-Party Equipment with Different Modbus Protocol
- 6.0 ARCnet156
- 7.0 Wiring Guidelines
- Appendix A - Terminology
Third-Party and Building Management Interfaces
28
5.4 SiteTPI-E with OpenComms NIC (or OpenComms 485)
Customer has installed OpenComms NIC cards in Liebert environmental and power precision equip-
ment and wants to monitor the equipment with SiteScan Web. The following configuration also
applies to Liebert units with OpenComms 485 cards.
5.4.1 Target Application
A typical application might be:
• Facility manager and IT manager both need to monitor equipment
• Graphical or non-graphical software
• Liebert units with OpenComms NICs installed
5.4.2 Description
For this configuration, the customer has equipment that is managed and monitored by the facility
engineer and the IT manager. It is important for the facility manager to monitor all the equipment in
their location. The equipment in the data center needs to be monitored by the IT manager.
Note: Since the SiteTPI is connecting to Liebert equipment, TPICONFIGs are not required.
5.4.3 Bill of Materials
Figure 17 Example of SiteTPI-E with OpenComms NIC*
Table 18 Bill of materials: SiteTPI-E with OpenComms NIC
Qty. Mktg. P/N Description
1 SSWEB SiteScan Web upgrade of SS2000W or SS2W
1 SITEGATE-E 32-Bit Ethernet-ready Gateway module
1 SiteTPI-E TPI to integrate Modbus device into SiteScan Web
2 XFMR24 External power supply - 120VAC/24VAC
2 HIGRAPHIC Graphic floor plan
Customer Network
SiteScan Web
Server
Up to 24 modules
* NOTE: The same configuration may be used for Liebert units with OpenComms 485 cards.