Specifications

Upgrading SiteScan 2000 Systems to SiteScan Web
21
4.3 Upgrading SS2000W While Maintaining Existing Wiring
A SiteScan Web upgrade of an existing SiteScan 2000W system requires replacing each DCLan or
SiteGate-232 module with a SiteGate-E module. All graphics must be upgraded.
4.3.1 Target Application
A typical application for this upgrade might be:
• Customer wants to upgrade a SiteScan 2000W system.
• Existing system uses a DCLan.
• System has five graphics.
• CMnet has two DC12-i422 modules and three SiteLink-12 modules.
4.3.2 Description
To upgrade a SS2000W system that currently uses a DCLan, replace the DCLan with a SiteGate-E.
Next, you must upgrade the customer’s current graphics by ordering one (1) HIGRAPHICUP-5.
Lastly, both DC12-i422 modules must be replaced with SiteLink modules.
4.3.3 Bill of Materials
Figure 8 Upgrading from SiteScan SS2000W while maintaining existing wiring
NOTE
Customers may have to replace the computer running SS2000W if it does not meet the
minimum operating requirements for SiteScan Web (see Table 1 in 2.1.1 - SSWEB -
SiteScan Web Base Product). In addition, that computer must be connected to an Ethernet
network.
Table 10 Bill of materials: Upgrade from SS2000W
Qty. Mktg. P/N Description
1 SSWEBUP SiteScan Web upgrade of SS2000W or SS2W
1 SITEGATE-E 32-bit Ethernet-ready gateway module
1 XFMR24 Transformers for 120/24VAC module power supply
1 HIGRAPHICUP-5 Upgrades up to five (5) SS2000W graphics
2 SITELINK-12 SiteScan interface module to 12 Liebert units
Note: The bill of materials does not include LGS startup part numbers. Most LGS startup
part numbers are added automatically when ordering.
Ethernet
SiteGate-EReplace with
Add
DC
Lan
DC12-i422
DC12
DC12-i422
DC12
EXISTING
SYSTEM
UPGRADED
SYSTEM
Replace with
SiteLink-12
SiteLink-12