COMPLETE STEREO SYSTEM with AM/FM STEREO RADIO, CD and CASSETTE PLAYER, and FULL SIZE STEREO PHONOGRAPH , OWNER S MANUAL NR303TTC Visit our web site at: www.emersonelectronics.
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence , within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Thank you............ for purchasing this Emerson Heritage Series complete home stereo system. Inside this beautiful real wood veneer cabinet you will find a state of the art audio system that includes an AM/FM Stereo Radio, a Compact Disc player, and a wide-range dynamic speakers. This system has been designed to provide you with many years of enjoyment and trouble-free operation with an absolute minimum of care and maintenance.
IMPORTANT NOTES Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/ or humid or moist areas. , Before turning On the power, make certain that power cord is properly installed. Do not attempt to clean this unit with chemical solvents as this might damage the finish.
IMPORTANT NOTES IMPORTANT Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected radio/television tuner. NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PREPARATION FOR USE UNPACKING AND SET UP Carefully remove the unit from the display carton and remove all packing material from the unit. Unwind the AC power cord and extend it to its full length. Unwind the FM Antenna wire and extend it to its full length. Place the unit on a stable, level surface, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, humidity, or strong magnetic fields. Connect the plug to your AC outlet.
Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in the direction of the arrow. STYLUS COVER Discard the stylus cover. Remove the twist-tie that was used to secure the tone arm during shipment. Release the tone arm lock lever. TONE ARM LOCK LEVER Connect the plug to your AC outlet.
POWER SOURCE This system is designed to operate on normal 120V 60 Hz AC only. Attempting to operate from any other power source may cause damage to the system, and such damage is not covered by your warranty. NOTE: You will note that this system is equipped with a polarized AC power plug having one blade wider than the other. This is a safety feature. If this plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet.
LOCATION OF CONTROLS AND INDICATORS FRONT PANEL 7 6 5 4 3 2 1 1 8 21 20 9 19 18 17 16 15 14 13 12 11 10 1.) Speakers. 11.) CD OPEN/CLOSE Button. 2.) AM Dial Scale. 12.) EARPHONE (Headphone) Jack. 3.) Tuning Control. 13.) CD STOP Button. 4.) FM Dial Scale. 14.) CD F.F (Fast Forward) Button. 5.) Turntable. 15.) CD F.R (Fast Reverse) Button. 6.) Phonograph Lid Support Bracket. 16.) CD PLAY/PAUSE Button. 7.) Phonograph Lid. 17.) POWER On Indicator. 8.) Cassette Player Slot. 18.
BACK PANEL 23 22 22.) AC Power Cord. 23.) FM Lead Wire Antenna. 2 3 PHONOGRAPH 1.) Turntable. 2.) 45 rpm Adapter. 3.) Transit Screw. 4 5 6 7 1 4.) Cue Lever. 5.) Speed Selector (33/45/78 rpm). 6.) Tone Arm Lock. 7.) Tone Arm with Stylus.
OPERATING INSTRUCTIONS Listening To The Radio , 1.) To turn the system on , rotate the OFF-VOLUME control clockwise , until a click is heard, and set the Volume to a low level. The POWER indicator lights up. , , 2.) Set the Function selector (AM/FM/TAPE/CD/PHONO) to the AM or FM band , as desired . The dial scale light comes on . , 3.) Rotate the TUNING control to tune the desired radio station. If you tune to an FM stereo station, the FM ST. Indicator will light and reception will be in stereo.
PLAYING COMPACT DISCS 1.) Turn the OFF-VOLUME control , clockwise until a click is heard, and set the volume to a low level. 2 1 , 8 3 2.) S e t t h e F u n c t i o n s e l e c t o r (AM/FM//TAPE/CD/PHONO) to the CD position. The CD track number , display comes On . , 6 4 3.) Press the CD OPEN/CLOSE button to open the CD drawer. 4.) Place your disc in the drawer with the printed label side facing up. 5.) Press the CD OPEN/CLOSE button once more to close the drawer.
Skipping Tracks And High Speed Music Search During CD Playback, repeatedly press the F. F (Forward Forward) or F.R (Fast Reverse) buttons to skip to higher or lower number tracks. When the desired track number appears on the display release the buttons and playback will begin on the desired track. To rapidly search forward or back within a track to locate a specific musical passage, depress and hold either the F.F (Forward Forward) or F.R (Fast Reverse) buttons.
PLAYING CASSETTE TAPES Note: Before inserting a tape in the player be sure that there is no excess slack in the cassette that could become jammed in the mechanism. Refer to the CARE AND MAINTENANCE section for instructions on removing excess slack from the cassette. , 1.) Rotate the OFF-VOLUME control clockwise until a click is heard and set , the Volume to a low level. The POWER indicator comes on . , , 2.) Set the Function selector (AM/FM/TAPE/CD/PHONO) to the TAPE position. 3.
PLAYING RECORDS This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and 78 rpm records. , 1.) Turn the OFF-VOLUME control clockwise until a click is heard, and set the Volume to a low level. , 2.) Set the Function (AM/FM/TAPE/CD/PHONO) selector to the PHONO position. 3.) Make sure that you have removed the stylus cover from the stylus and have released the Tone Arm Lock that secured the tone arm to the tone arm rest. 4.
IMPORTANT!! T O P R O T E C T T H E T U R N TA B L E F R O M D A M A G E D U R I N G TRANSPORTATION, A SILVER TRANSIT SCREW IS LOCATED AT THE UPPER RIGHT OF THE TURNTABLE PLATFORM. BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO TURN THE TRANSIT SCREW IN CLOCKWISE DIRECTION (SCREW GOING DOWN) COMPLETELY TO UNLOCK THE TURNTABLE. TO CLOCK THE TURNTABLE AGAIN FOR TRANSPORTATION, PLEASE TURN THE SCREW IN COUNTER-CLOCKWISE DIRECTION.
CARE AND MAINTENANCE CASSETTE CARE Two common causes of trouble experienced when using cassettes are: 1.) Tape jamming - Leading to uneven speed in playback, and 2.) Tape tangling - Where the tape wraps itself around vital parts of the mechanism. To reduce the likelihood of these problems occurring, the following precautions should be observed: Check that there are no loose layers of tape visible through the cassette centre window (see Fig. 1).
CARE AND MAINTENANCE COMPACT DISC CARE To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges. Fingerprints and dust should be carefully wiped off the discs recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc.
EMERSON WARRANTY Consumer Electronics, Home Appliances and Home Office Products Thank you for choosing EMERSON! SYNNEX Canada Limited gives the following express warranty to the original consumer purchaser or gift recipient for this EMERSON product, when shipped in its original container and sold or distributed in Canada by SYNNEX Canada Limited or by an Authorized EMERSON Dealer.
g. Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus markings. h. Any products used for rental or commercial purposes. i. Any installation, setup and/or programming charges. Should this EMERSON product fail to operate during the warranty period, warranty service may be obtained upon delivery of the EMERSON product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized EMERSON Service Centre.
EMERSON Part NO.
