Radio User Manual
Table Of Contents
- Ò³Ãæ 1
- Ò³Ãæ 2
- Ò³Ãæ 3
- Ò³Ãæ 4
- Ò³Ãæ 5
- Ò³Ãæ 6
- Ò³Ãæ 7
- Ò³Ãæ 8
- Ò³Ãæ 9
- Ò³Ãæ 10
- Ò³Ãæ 11
- Ò³Ãæ 12
- Ò³Ãæ 13
- Ò³Ãæ 14
- Ò³Ãæ 15
- Ò³Ãæ 16
- Ò³Ãæ 17
- Ò³Ãæ 18
- Ò³Ãæ 19
- Ò³Ãæ 20
- Ò³Ãæ 21
- Ò³Ãæ 22
- Ò³Ãæ 23
- Ò³Ãæ 24
- Ò³Ãæ 25
- Ò³Ãæ 26
- Ò³Ãæ 27
- Ò³Ãæ 28
- Ò³Ãæ 29
- Ò³Ãæ 30
- Ò³Ãæ 31
- Ò³Ãæ 32
- Ò³Ãæ 33
- Ò³Ãæ 34
- Ò³Ãæ 35
- Ò³Ãæ 36
- Ò³Ãæ 37
- Ò³Ãæ 38
- Ò³Ãæ 39
- Ò³Ãæ 40
- Ò³Ãæ 41
- Ò³Ãæ 42
- Ò³Ãæ 43
- Ò³Ãæ 44
- Ò³Ãæ 45
- Ò³Ãæ 46
- Ò³Ãæ 47
- Ò³Ãæ 48
- Ò³Ãæ 49
- Ò³Ãæ 50
- Ò³Ãæ 51
- Ò³Ãæ 52
- Ò³Ãæ 53
- Ò³Ãæ 54
18
Playing Records
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33,
45, and 78 rpm records.
Turn the OFF-VOLUME control clockwise until a click is heard, and set
the Volume to a low level.
1.)
,
,
Set the Function (AM/FM/TAPE/CD/PHONO) selector to the PHONO
position.
2.)
Make sure that you have removed the stylus cover from the stylus and
have released the Tone Arm Lock that secured the tone arm to the tone
arm rest.
3.)
Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78
rpm. If you are playing 45 rpm singles , place the 45 rpm adapter on the
centre spindle.
4.)
,
,
Place your record on the centre spindle.
5.)
Raise the Cue lever to lift the tone arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically. Use the Cue lever to
gently lower the tone arm onto the record.
6.)
Adjust the OFF-VOLUME control to the desired level.
7.)
When the tone arm reaches the end of the record it automatically returns to
the tone arm rest and the record player stops.
8.)
To turn the system off , rotate the OFF-VOLUME control counter
clockwise until a click is heard. The POWER indicator goes off .
9.)
,
,
,
,
,
,
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
Tone Arm.