Specifications

S
TARTUP AND
O
PERATION
748410-A
August 1999
14
Chemiluminescense Detector Analyzer Module
Rosemount Analytical NGA 2000
3
DISPLAY MESSAGE DESCRIPTION TYPE
BAROMETER System Barometer WARNING
BLOCK FET Heater Current WARNING
BLOCK THRESH CLD Threshold Temperature WARNING
BLOK TEMP Block Temperature WARNING
CONV FET Converter Heater Temperature WARNING
CONV TEMP Converter Temperature WARNING
CRUDE NOISE Calculated Noise WARNING
LIN ERROR Linearizer Error WARNING
N15 VOLTS Power Supply, -15V WARNING
OZON PRES CLD Ozone Supply Pressure WARNING
P10 VOLTS Power Supply, +10V Ref WARNING
P12 VOLTS Power Supply, +12V WARNING
P15 VOLTS Power Supply, +15V WARNING
P24 VOLTS Power Supply, +24V WARNING
P5 VOLTS Power Supply, +5V WARNING
RAW SIGNAL Raw Signal WARNING
SAMP PRES Sample Pressure WARNING
SVFLOW Sample Bypass Flow WARNING
PELT TEMP CLD Peltier Cooler Temperature FAILURE
SW ERROR Software Error FAILURE
T
ABLE
3-1. CLD A
NALYZER
M
ODULE
A
LARMS
3.2.3 H
ELP
D
ISPLAYS
The Help structure is on-line "tutorial," context-sensitive and topic-interconnected, so that
the user can practically operate NGA 2000 without need of an instruction manual. Press the
INFO softkey for help. (See Figure 3-6.)
3.3 S
TARTUP
P
ROCEDURE
Apply power to the CLD Analyzer Module. If it is associated with a Platform, do this by
plugging in the Platform to a power source. The Platform has no ON/OFF power button.
Once power has been supplied to the Platform, the CLD Analyzer Module will be energized.
If the user's system contains only one Analyzer Module, all system components, the
Controller Board and the network "self-install" (bind together) during initial startup. If the
system contains more than one Analyzer Module, the startup sequence will interrogate the
network to locate and identify all components on the network. The user will have to bind
appropriate combinations of components after the startup sequence.