User manual

Accessing an RPC2 Communications Module via the Web Interface
39 Emerson
®
RPC2
™
To add a group:
1. From the System tab’s navigation tree, click Authorization>Groups.
2. To add a group, click the Add icon at the top of the page, enter the name for the new group.
3. Set the access level for members of the group by granting access to receptacles.
4. Click the Save icon, ✔.
To delete a group:
1. Check the box next to the group to be deleted
2. Click the Delete icon.
To add a user to a group:
1. From the System tab’s navigation tree, click Authorization>Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In the Local User List or the Remote User List, select the user to be added and click the right
arrow.
5. Click the Save icon, ✔.
To delete a user from a group:
1. From the System tab’s navigation tree, click Authorization>Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In the Group User List, select the user to be removed and click the left arrow.
5. Click the Save icon, ✔.
To add a user to a group:
1. From the System tab’s navigation tree, click Authorization>Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In either the Local User List or the Remote User List, select the user to be added and click the
right arrow.
5. Click the Save icon, ✔.
To delete a user from a group:
1. From the System tab’s navigation tree, click Authorization>Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In the Group User List, select the user to be removed and click the left arrow.
5. Click the Save icon, ✔.
To assign receptacles to a user group:
1. From the System tab’s navigation tree, click Authorization>Groups.
2. Check the box next to either the user group or a custom group where the receptacles will be
added.
3. Check the boxes next to the receptacles to be added to the group. To assign all receptacles, click
the box at the top of the column.
4. Click the Save icon, ✔, when finished.
NOTE
Receptacles cannot be assigned to the administrator, poweruser or system user groups. Each of
these default groups has its access level set in the software.