User manual

Accessing an RPC2 Communications Module via the Web Interface

Emerson

RPC2

™

4.7 Events Tab

Click the Events tab to see a list of rack PDU events. Use the drop-down menus to filter events.

Events can be configured for SNMP Traps, Syslog, Email and SMS in the System Tab.

Click the Download icon at the top of the page to download a log file for all events. A downloaded

event log can be imported into Microsoft

Excel

and viewed as a spreadsheet.

Figure 22 Events tab

4.8 System Tab

The System tab permits viewing information about the RPC2 communications module, as shown in

Figure 23. An administrator can configure the RPC2 communications module’s parameters, such as

notifications and SNMP traps and access. An administrator can also update the RPC2

communications module’s firmware and change passwords.

Figure 23 System tab

4.8.1 System Tab—Support

Click Support in the System tab navigation tree to view information about the RPC2

communications module. Click the Print icon at the top of the page to print the summary table.

NOTE

This is a read-only page.

Support

Information