User manual

Introduction
Emerson
®
RPC2
™
4
1.2 Ports on the RPC2
The module has six ports designated by icons (see Figure 1). Connect an Ethernet cable (not
included) to the Network port. Connect that cable to the network.
Figure 1 RPC2 communications module ports
Table 2 RPC2 communications module port icons
Icon Name Purpose For details, refer to Section:
Serial Port
• Use this port for RS-232 serial
communication using Command Line
Interface (CLI)
—
USB Port
• Future Applications
—
SensorPort
• Use this port ONLY to plug in optional
sensor accessories.
6.0 - Liebert SN
™
Sensor
Installation (Optional)
Display Port
• Use this port ONLY to plug in the
RPC BDM (Basic Display Module).
5.2 - RPC BDM
™
Installation
Link Port
Use this port ONLY for:
• Local configuration through
interconnection to a computer
2.2 - Field-Installation of an RPC2
Communications Module
• Creating a Rack PDU Array by
interconnecting additional rack PDUs
2.5 - Create a Rack PDU Array
™
Network
Port
Use this port ONLY to:
• Plug in the Local Area Network (LAN) via
an Ethernet cable (not included).
2.2 - Field-Installation of an RPC2
Communications Module
• Create a Rack PDU Array
™
by
interconnecting additional rack PDUs
2.5 - Create a Rack PDU Array
™
Serial
Port
USB Port
Display
Port
Link
Port
Network
Port
Sensor
Port
Reset Button
Access Hole
RS232