Brochure

2
Without
Energy Optimization
With
Energy Optimization
System Efficiency
Improvement
10%
84%
86%
88%
92%
90%
94%
98%
96%
20% 30% 40% 50% 60% 70% 80% 90% 100%
System Efficiency*
Load
*System efficiency includes AC to DC power conversion and internal distribution losses.
Rising power density, rapid and unpredictable growth,
escalating energy consumption and cost, plus a myriad of
other power-related challenges are making it increasingly
complicated and expensive to protect critical network
and computing equipment. The NetSure
™
ITM integrates
DC UPS components into a compact, highly reliable
power protection system, offering the answer to your
current and future 48V power needs. This three-phase
480V AC input, 48V DC output UPS provides highly
available power to a wide variety of IT applications and
delivers advanced operating features combined with
reduced total cost of ownership.
The NetSure
™
ITM is designed for deployment directly on
the server room floor, and provides protected 48V power to nearby equipment racks. This
preserves the efficiency and reliability benefits of DC power, while minimizing the amount
of copper required and enabling modular growth.
The NetSure
™
ITM lowers the cost of
data center design, operation and
management. This 48V direct current
solution is a row-based DC UPS that
delivers simple, scalable and highly
efficient power protection.
A Complete Power Protection Solution
Features & Benefits
High system efficiency: Reduced power
conversion stages combined with 96%
efficient eSure
™
power conversion units
(PCUs) and an advanced energy
optimization mode enable significant
energy savings even at low loads.
Scalability and ease of deployment:
Minimize your initial investment and avoid
stranded power by adding expansion DC
UPS modules without interruption in the
field as power needs increase.
DC architecture simplicity: Fewer
components, conversion stages and
distribution breakers throughout the power
chain ensure high availability; elimination of
complex synchronization circuits and the
need to de-rate capacity for phase balancing
or harmonics makes it easy to engineer.
High reliability and exceptional resiliency:
Uninterrupted operation in the unlikely
event of multiple component failures.
Ease of maintenance: Field replaceable,
hot swappable PCUs allow rapid replace-
ment without critical bus disruption; low
voltage allows maintenance without
bypass or shutdown.
Compact footprint: Row-based, integrated
design saves considerable facility space by
eliminating the need for a dedicated power
room and separate PDU distribution.
Flexible deployment options: Top or
bottom cable entry allows for raised or
non-raised floor installations.
Advanced control and monitoring: Real
time input and output monitoring,
including power quality and consumption
data, enables facility planning for the
system and each branch circuit; state-of-
the-art battery monitoring with Albér
technology to assure optimal backup
performance.
One-year warranty: Provides full system
coverage for one year.
NetSure
™
ITM DC UPS Module
Top-Cabled Configuration
Figure 1: NetSure
™
ITM System Efficiency
Efficiency Without Compromise
™
provides a path to optimize data center infrastructure
around design, operating and management efficiencies –
while maintaining or improving availability. This is
achieved through the proper selection and utilization of
cooling, power and monitoring technologies, supported
by key services and local expertise.