Installation Manual

ManualsBrandsEmerson ManualsDC PowerEmerson NetSure 9500 120kW 400V DC Power System

NetSure

™

9500 120kW 400V DC Power System

Installation Manual, IM584001200 (Issue AA, April 14, 2014)

Spec. No: 584001200 Code: IM584001200

Model No: 9500 Issue AA, April 14, 2014

[15 of 25]

Electrical Connections to Distribution Module/Bay

(584001200 List 07)

Distribution Module/Bay Rack Frame Grounding/Earthing

Connection

Refer also to “General Grounding/Earthing Guidelines” on page 4.

Supply a grounding/earthing lead from site ground/earth to the

rack ground bar. Refer to Figure 14 for connection point.

Figure 14. Distribution Module/Bay Rack Frame Grounding/Earthing

Distribution Module/Bay Distribution Panel List 21HA

Connections

Danger! Adhere to the “Important Safety Instructions”

presented at the front of this document. DO NOT

attempt to work on an energized system.

Warning! Check for correct polarity before making

connections.

OUTPUT CONNECTIONS

Load distribution leads are connected to the load distribution

panel(s) as shown in Figure 15.

INTERCONNECTING DC DISTRIBUTION PANELS (IF REQUIRED)

DC distribution panels can be interconnected as shown in Figure

15.

INPUT CONNECTIONS

DC distribution panel DC input leads are connected to the

distribution panel(s) as shown in Figure 15.

Rear

Ground Bar

(M6 studs on

16mm [5/8”]

centers)

(Recommended

orqu

84 in-lbs [9.5 Nm])