User's Manual

Section 5877 User Instructions
Issue AQ, January 15, 2013 Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B)
Page 4-22 Chapter 4. MCA System Adjustments
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CONFIGURING THE SYSTEM DATE AND TIME
1) All controls are located on the MCA Interface Pad.
2) With SYSTEM OK being displayed on the MCA Interface Pad, press and release
the FUNCTION SET ENTER key. The FUNCTION MENU is displayed.
or
In the MAIN ALARM MENU, repeatedly press and release the FUNCTION
SELECT DOWN arrow key until "GO TO FUNCTION MENU" is displayed. Press
and release the FUNCTION SET ENTER key. The FUNCTION MENU is
displayed.
3) Repeatedly press and release the FUNCTION SELECT DOWN arrow key until
"CHANGE CONFIGURATION PARAMETERS" is displayed.
4) Press and release the FUNCTION SET ENTER key.
5) Repeatedly press and release the FUNCTION SELECT DOWN arrow key until
"IT IS NOW hh:mm:ss dd-mon-yy" is displayed.
6) Press and release the ALARM CUTOFF and FUNCTION SET ENTER keys
simultaneously. The day of the month is underlined.
7) Press FUNCTION SET YES (+) and NO (-) keys to change the day of month.
8) Press FUNCTION SET ENTER key. Month is underlined.
9) Press FUNCTION SET YES (+) and NO (-) keys to change the month.
10) Press FUNCTION SET ENTER key. Year is underlined.
11) Press FUNCTION SET YES (+) and NO (-) keys to change the year.
12) Press FUNCTION SET ENTER key. Hour is underlined.
13) Press FUNCTION SET YES (+) and NO (-) keys to change the hour.
14) Press FUNCTION SET ENTER key. Minutes is underlined.
15) Press FUNCTION SET YES (+) and NO (-) keys to change the minutes.
16) Press FUNCTION SET ENTER key.