Installation Instructions

Installation Instructions Section 5876
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AT, April 26, 2013
Chapter 4. Making Electrical Connections Page 4-35
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 4-10 (cont'd on next page)
Load Connections to Power/Distribution Bays
* Includes Load Lug Adapter Plate,
plus 1/4" and 3/8" Mtg. Hardware.
Bus #1
Distribution Device
Mounting Location
Position 1 (left),
Position 24 (right)
Bus #2
Distribution Device
Mounting Location
Position 25 (left),
Position 48 (right)
Front View
Load Lug and/or Load Lug Adapter Plate
Mounting Location Dimensions
0.625"
0.765"
1/4-20 Studs
and Hardware
Load Lug Adapter
Plate P/N 513701,
Kit P/N 520892*
Load Lug Adapter
Plate P/N 514765,
Kit P/N 520894*
Load Lug Adapter
Plate P/N 513702,
Kit P/N 520893*
Load Lug Adapter
Plate P/N 513700,
Kit P/N 520891*
to Distribution:
Bus #1
Position #12
to Distribution:
Bus #2
Position #25
to Distribution:
Bus #2
Position #36
to Distribution:
Bus #1
Position #1
to Distribution:
Bus #1
Position #13
to Distribution:
Bus #1
Position #24
to Distribution:
Bus #2
Position #37
to Distribution:
Bus #2
Position #48
1 12 13 24
25 36 37 48
Connect Load Leads Here
(Load Lug Adapter Plates
may be Required. Refer to
Previous Illustrations)
Recm. Torque
1/4" Hardware
using Belleville
Lock Washer,
60 in-
lbs.
1/4" Hardware
using flat washer
and lock washer,
84 in-lbs.
3/8" Hardware
using Belleville
Lock Washer,
180 in-lbs.
3/8" Hardware
using flat washer
and lock washer,
300 in-lbs.