Installation Guide

Section 5957 Installation Guide
Issue AM, March 26, 2014 Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B)
Page 10
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Installing Power/Distribution Bay to Power/Distribution Bay
Negative and Positive Busbar Links – New Style Bay Connected to an Existing Older Style Bay
3/8-16 x 1-1/2" Bolt
3/8" Belleville Lock Washer
3/8" Belleville Lock Washer
(concave side of Belleville
Lock Washers face each other)
3/8” Hardened Flat Washer
POSITIVE
BUSBAR LINK
NEGATIVE
BUSBAR LINK
Existing Older Style Bay
side, use ALL bolt holes.
Slide Busbar Links Under
Bays' Upright Channels.
Torque to 180 in-lbs.
Newer Style Bay side,
use bolt holes as
shown in illustration.
Existing Older
Style Bay
Existing Older
Style Bay
Newer
Style Bay
Newer
Style Bay
List 1 and 11 shown.
List 2 and 12 w/ List 30 or 31 similar.