Application Guide

Installation Instructions Section 5876
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AT, April 26, 2013
Chapter 3. Installing Distribution Devices and MCA/LMS Circuit Cards Page 3-17
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 3-8
Installing TLS/TPS Fuses and Bullet Nose-Type Circuit Breakers (List C)
TLS/TPS Fuses
Bullet Nose-Type
Circuit Breakers
Toggle
Handle
Breaker
Rocker
Handle
Breaker
Bullet Nose-Type
Fuseholder,
P/N 117201
GMT-18/100A
Alarm Fuse
& GMT-X
Safety Fuse Cover
TLS/TPS
Fuse
Shorter side
to the top.
Longer side
to the
bottom.
Long er
side to the
bottom.
Shorter
side to the
top.
Load leads are connected to load busbars.
These busbars provide 1/4-20 threaded holes
on 5/8” centers for installation of customer
provided two-hole lugs. Customer must
provide lug mounting bolts and additional
hardware. Bolt length: 3/4”.
Note: