Application Guide

Installation Instructions Section 5876
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AT, April 26, 2013
Chapter 3. Installing Distribution Devices and MCA/LMS Circuit Cards Page 3-9
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 3-4 (cont’d from previous page, cont’d on next page)
Installing Load Lug Adapter Plates into Distribution Only Bays
Customer
Supplied
Lug
Busbars
P/O Dist.
Bay
2-Position
Lug Adapter Kit
P/N 529132
Customer
Supplied
Lug
Customer
Supplied
Lugs
Customer
Supplied
Lugs
Busbars
P/O Dist.
Bay
Note: Apply Electrical Anti-Oxidation
Compound to all Busbar
Mating Surfaces.
Note: Concave Side of Belleville Washer Faces Busbar,
Convex Side Faces Bolt or Nut.
(1) Spacer Busbar,
P/N 528806
(1) Adapter Busbar,
P/N 528794
(2) 3/8-16 Hex Nut,
P/N 228567100
(2) 3/8" Flat Washer,
P/N 214204100
(1) 3/8-16 Hex Nut,
P/N 228567100
(1) 3/8" Flat Washer,
P/N 214204100
Torque to 180 in-lbs.
(1) 1/4-20 x 7/8" Bolt,
P/N 227640500
(1) 1/4" Flat Washer,
P/N 214110100
(2) 3/8-16 x 1-1/2" Bolt,
P/N 227647000
(2) 3/8" Belleville Lock Washer,
P/N 214825000
(4) 3/8-16 x 1-1/2" Bolt,
P/N 227647000
(4) 3/8" Flat Washer,
P/N 214112100
(1) 3/8-16 x 1" Bolt,
P/N 227646600
(1) 3/8" Belleville Lock Washer,
P/N 214825000
(1) 1/4-20 x 7/8" Bolt,
P/N 227640500
(1) 1/4" Flat Washer,
P/N 214110100
(1) Adapter Busbar,
P/N 528794
(8) 3/8-16 Hex Nut,
P/N 228567100
(8) 3/8" Lock Washer
P/N 215111300
(8) 3/8" Flat Washer,
P/N 214112100
Torque to 300 in-lbs.
Torque to 84 in-lbs.
Torque to 84 in-lbs.
(1) 1/4-20 Hex Nut,
P/N 228557100
(1) 1/4" Lock Washer
P/N 215111100
(1) 1/4" Flat Washer,
P/N 214110100