Application Guide

Section 5876 Installation Instructions
Issue AT, April 26, 2013 Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B)
Page 2-50 Chapter 2. Placing the Bays and Installing Internal/External Busbars
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 2-36
Power/Distribution Bay External Top-Mount Ground (Load Return) Busbar Assembly (P/N 514690 or 514691)
Assembly Procedure Step 4
(2) 1/4-20 x 1/2" Bolt, P/N 227640200
(2) 1/4" Lock Washer, P/N 215111100
(2) 1/4" Flat Washer, P/N 214110100
(2) 10-32 Lock Nut, P/N 104564
(2) 10-32 x 3/4" Tap Screw, P/N 218706500
Assembled
View
Rear
Top
of Bay
Torque to 45 in-lbs.
STEP 4
Install "Covers".
DO NOT PERFORM THIS STEP if you are going to install
"Load Return Lug Extension Busbar Assembly" P/N 514543
P
/
N
5
1
4
5
2
1
P
/
N
5
1
4
5
1
9