Application Guide

Section 5876 Installation Instructions
Issue AT, April 26, 2013 Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B)
Page 2-46 Chapter 2. Placing the Bays and Installing Internal/External Busbars
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 2-32
Power/Distribution Bay External Top-Mount Ground (Load Return) Busbar Assembly (P/N 514690 or 514691)
Assembly Procedure Step 2A
Torque to 180 in-lbs.
Busbar Assy P/N 514690 (1) 5/8-11 x 1-3/4" Bolt, P/N 227653800
5/8-11 x 2-3/4" Bolt, P/N 227653900
and
(1) 5/8" Lock Washer, P/N 215111800
and
(1) 5/8" Flat Washer, P/N 214201300
P/N 214825000
P/N 214825000
(4) 3/8" Belleville Washer
P/N 228567100
(4) 3/8-16 Hex Nut
Note: Concave Side of Belleville
Washer Faces Busbar,
Convex Side Faces Nut.
(6) 3/8" Flat Washer
P/N 214204100
(6) 3/8" Belleville Washer
P/N 214825000
(6) 3/8-16 x 1-1/4" Bolt
P/N 22764680
0
Torque to 180 in-lbs.
Note: Concave Side of Belleville
Washer Faces Busbar,
Convex Side Faces Bolt Head.
Belleville Washer install between
Bolt Head and Flat Washer.
Previously Assembled
Kit P/N 554873
Busbar, P/N 514469
Busbar, P/N 514541
Busbar, P/N 514469
Busbar, P/N 514467
P/N 514691 Only
Busbar, P/N 514469
P/N 514691 Only
Busbar, P/N 514522
Busbar, P/N 514469
Busbar, P/N 514467
P/N 514691 Only
STEP 2A
Install "Busbars".
(see Step 2B for Bolt Hole Identification)
(s
ee Step 2C for Assembled View)
Note: Apply Electrical Anti-Oxidation
Compound to all Busbar
Mating Surfaces.
* Use "Spacer Busbars" or "Spacer Insulators"
on end bays or stand-alone bays. For multiple
bays, use "Spacer Busbars" and move out
to 'bridge' between busbars of both
Assemblies (see Assembled View).
(4) 3/8-16 x 2" Bolt, P/N 227647400
or
Busbar Assy P/N 514691
or
Torque to 715 in-lbs.
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
P/N 514691 Only
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*
P/N 514691 Only
Spacer Busbar, P/N 514472*
Spacer Insulator, P/N 514473*