Application Guide

ManualsBrandsEmerson ManualsDC PowerEmerson NetSure 802 DC Power System

Section 5876 Installation Instructions

Issue AT, April 26, 2013 Spec. No. 582140000 (Models 802

NLDB, 802NLEB and 802NL-B)

Page 2-44 Chapter 2. Placing the Bays and Installing Internal/External Busbars

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

Installation Procedure for P/N 514690 and 514691

Danger: Before performing this procedure, ensure that the Power/Distribution Bay

is COMPLETELY DISCONNECTED from all power sources.

Note: Apply electrical anti-oxidation compound to mating surfaces of busbars before

connecting together.

Assemble the Busbar Kit to the top of the bays as shown in Figure 2-31 through Figure

2-36. Refer to Figure 2-35 and Figure 2-36

for assembled views. Note that these Busbar

Kits require "External Top-Mount Horizontal Battery Input Busbar Assembly", P/N

554873. These Busbar Kits attach to the P/N 554873 Busbar Kit.