Application Guide

Section 5876 Installation Instructions
Issue AT, April 26, 2013 Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B)
Page 2-30 Chapter 2. Placing the Bays and Installing Internal/External Busbars
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 2-18
Power/Distribution Bay External Top-Mount Horizontal Busbar Assembly (P/N 554873)
Assembly Procedure Step 5
STEP 5
Install "Threaded Insulators" onto
"Horizontal Landing Negative Busbar".
(2) Threaded Insulator, P/N 245857200
(2) 5/8-11 x 1-1/4" Threaded Rod, P/N 334315700
(2) Threaded Insulator, P/N 245857200
(2) 5/8-11 x 1-1/2" Threaded Rod, P/N 334315900
Hand-Tighten
Hand-Tighten
Assembled
View
Rear Top
of Bay