Application Guide

Section 5876 Installation Instructions
Issue AT, April 26, 2013 Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B)
Page 4-42 Chapter 4. Making Electrical Connections
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 4-14
Installing and Wiring an Optional Bullet Nose-Type
10-Position GMT Fuse Module (P/N 509128)
Wire Size
24 to 14 AWG.
Torque 5.0 in-lbs.
Load Return
Connections
-48V Load
Connections
Load Lead Connections (-48V) or
Ground/Return to GMT Module (+Ground)
DANGER
Ensure leads are connected to
proper polarity for the device
installed, either a Distribution
Device (load lead connection)
or ground/return to GMT Module
(ground connection).
List C Fuse/Circuit Breaker Panel
GMT Module
P/N 509128
NOT
USED
Connect Ground for
GMT Module at either
of these two points
F11
F12
F1 thru F10
GMT Module
P/N 509128