Application Guide

Installation Instructions Section 5876
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AT, April 26, 2013
Chapter 1. General Information and Installation Checklist Page 1-3
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
 Connections Made to all LMS Eight Input Temperature Circuit Cards Installed
 LMS Energy Management Connections Made (as required)
 LMS Sequential Start Connections Made (as required)
 LMS Expansion Assembly(s) (if furnished) Interconnected to Customer Equipment
 LMS Network Bay and Optional LMS Expansion Cabinet(s) and Assembly(s)
Interconnections Made (as required)
 Frame Grounding Connections Made
 Load Connections Made
 AC Input and AC Input Ground Connections Made
 Battery Connections Made
 All Shields and Cover Panels in Re-Installed
 MCA “Power Share” Connections Made (if required)
 Connections to Other Systems Made (if required)
Chapter 5. Installing the Rectifiers and Initially Starting the Power System
 Rectifiers Installed
 Router Circuit Cards Switches Set
 MCA Distribution Bus Monitoring Circuit Cards Jumper Set
 System Started, Configured, and Checked
 LMS Checked and Configured (as required)