Application Guide

Section 5876 Installation Instructions
Issue AT, April 26, 2013 Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B)
Page 1-2 Chapter 1. General Information and Installation Checklist
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Chapter 3. Installing Distribution Devices, MCA Relay
Circuit Cards, MCA I/O Circuit Cards, and LMS Circuit Cards
 Distribution Fuses and Circuit Breakers Installed
 Distribution Lug Adapter Plates Installed
 MCA Customer Alarm Relay Circuit Card(s) Installed (if required)
 MCA I/O Circuit Card(s) Installed (if required)
 LMS CPU Circuit Card Installed (if required)
 LMS Modem Circuit Card Installed (if required)
 LMS Four Input Analog Circuit Card Installed (if required)
after Making any Jumper Adjustment as Required
 LMS Eight Input Analog Circuit Card Installed (if required)
 LMS Twelve Input Analog Circuit Card Installed (if required)
 LMS Four Input Binary Circuit Card Installed (if required)
 LMS Eight Input Binary Circuit Card Installed (if required)
after Making any Jumper Adjustment as Required
 LMS Four Output (Form-C) Relay Circuit Card Installed (if required)
after Making any Jumper Adjustment as Required
 LMS Eight Input Temperature Circuit Card Installed (if required)
and Ground Lead Attached to Frame Ground
Chapter 4. Making Electrical Connections
 MCA Network Bay Interconnections Made
 MCA Battery Charge Digital Temperature Compensation Probe Mounted and
Connected (if furnished)
 MCA External Alarm, Reference, and Control Connections Made
 Connections Made to all MCA I/O Circuit Cards Installed
 External LMS CPU/Hardware Fail Alarm Connections Made (as required)
 LMS Local Port Connections Made (if required)
 LMS Ethernet Port Connections Made (if required)
 LMS Modem Port Connections Made (if required)
 LMS OEM (RS-485) Port Connections Made (if required)
 Connections Made to all LMS Four Input Analog Circuit Cards Installed
 Connections Made to all LMS Eight Input Analog Circuit Cards Installed
 Connections Made to all LMS Twelve Input Analog Circuit Cards Installed
 Connections Made to all LMS Four Input Binary Circuit Cards Installed
 Connections Made to all LMS Eight Input Binary Circuit Cards Installed
 Connections Made to all LMS Four Output (Form-C) Relay Circuit Cards Installed