Application Guide

Installation Instructions Section 5876
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AT, April 26, 2013
Chapter 4. Making Electrical Connections Page 4-3
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
WIRING CONSIDERATIONS
For recommended wire sizes, crimp lugs, branch circuit protection, alarm relay contact
ratings, and general wiring information and restrictions; refer to System Application Guide
SAG582140000. The SAG can be accessed via the CD (Electronic Documentation
Package) furnished with your system.
Refer to drawing 031110100 for lug crimping information. Refer to drawings 031110200
and 031110300 for additional lug information. These are located in the Installation
Manual.
All wiring and branch circuit protection should follow the current edition of the American
National Standards Institute (ANSI) approved National Fire Protection Association's
(NPFA) National Electrical Code (NEC), and applicable local codes. For operation in
countries where the NEC is not recognized, follow applicable codes. For field wiring, use
wires suitable for at least 75°C.