Application Guide

Installation Guide Section 5957
Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Issue AM, March 26, 2014
Page 15
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Power/Distribution Bay
External Top-Mount Horizontal Battery Input Busbar Assembly (P/N 554873)
Assembly Procedure Step 4
Note: Concave Side of Belleville Washer Faces
Busbar, Convex Side Faces Bolt Head.
Belleville Washer install between Bolt Head
and Flat Washer.
(1) Horizontal Landing Negative Busbar, P/N 514434
Note: Apply Electrical Anti-Oxidation Compound
to Busbar Mating Surfaces.
(6) 3/8” Belleville Washer, P/N 214825000
(6) 3/8-16 x 1-1/4” Bolt, P/N 227646800
(6) 3/8" Flat Washer, P/N 214204100
Assembled
View
Rear Top
of Bay
STEP 4
Install “Horizontal Landing Negative Busbar”
onto “Main Negative Busbar”.
Torque to 180 in-lbs.