Application Guide

Section 5957 Installation Guide
Issue AM, March 26, 2014 Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B)
Page 12
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Power/Distribution Bay
External Top-Mount Horizontal Battery Input Busbar Assembly (P/N 554873)
Assembly Procedure Step 1
STEP 1
Install “Main Positive Busbar” onto Bay’s
Positive Busbar. Hand-tighten hardware.
(1) Main Positive Busbar, P/N 554877
Note: Apply Electrical Anti-Oxidation Compound
to Busbar Mating Surfaces.
(12) 3/8” Flat Washer, P/N 214204100
(12) 3/8” Belleville Washer, P/N 214825000
(12) 3/8-16 Hex Nut, P/N 228567100
Hand-tighten.
Note: Concave Side of Belleville Washer Faces
Busbar, Convex Side Faces Hex Nut.
Belleville Washer install between Hex Nut
and Flat Washer.
Rear Top
of Bay
Assembled
View
Do the following first before assembly:
1. Remove 552402 (1) and 116638 (4) from Bay.
2. Mount 554880 to the 554877 with 116638 (3).