Application Guide

ManualsBrandsEmerson ManualsDC PowerEmerson NetSure 802 DC Power System

System Application Guide SAG582140000

Spec. No. 582140000 (Models 802

NLDB, 802NLEB and 802NL-B) Issue AW, June 3, 2014

Page 57 of 134

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

Input and Alarm Fuse on Optional Bullet Nose-Type 10-Position GMT Fuse Module, P/N 509128

Features

♦ Located on the optional Bullet Nose-Type 10-Position GMT Fuse Module (P/N 509128) is an input fuse.

If this fuse opens, an alarm type fuse also opens to activate the fuse alarm circuit. The alarm-type fuse is

located in fuse position #11 on the Fuse Module.

Restrictions

These fuses are not available for customer connected loads.

Ordering Notes

1) Order replacement fuses as required per Table 8.

Ampere

Rating

Part Number

110982

0.18

248610301

Safety

Fuse Cover

(Bussmann

GMT-Y)

102774

Table 8

Replacement Input Fuse and Associated Alarm Fuse on

Bullet Nose-Type 10-Position GMT Fuse Module P/N 509128

Optional Power/Distribution Bay Internal Ground Busbar Kits

Optional Internal Ground Busbar Kit (P/N 554862)

Features

♦ Provides one (1) Internal Ground Busbar Kit, which mounts inside a Power/Distribution Bay between the

two top distribution load busbars.

♦ Provides for installation of customer provided two-hole lugs with 1/4” clearance holes on 5/8” centers.

♦ Provides for installation of customer provided two-hole lugs with 3/8” clearance holes on 1” centers.

Restrictions

FACTORY INSTALLED ONLY.

Recommended for use with >100A distribution devices.

Rated for 2000 amperes per busbar.

All lugs for customer connections must be ordered separately.

Customer needs to supply lug mounting bolts and hardware.

Ordering Notes

1) Order Internal Ground Busbar Kit, P/N 554862, as required.

2) Factory to supply busbar mounting hardware as required.

Home