Application Guide

System Application Guide SAG582140000
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AW, June 3, 2014
Page 47 of 134
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Ampere
Rating
Number of Poles
(and mounting positions
required in Bullet Nose-
Type
Circuit Breaker/Fuseholder
Mounting Assembly)
Part Number
Electrical Trip
1
(White Handle)
Electrical/
Mechanical Trip
2
(Black Handle)
1 1 102272 101596
3 1 102273 101597
5 1 102274 101598
10 1 102275 101599
15 1 102276 101600
20 1 102277 101601
25 1 102278 101602
30 1 102279 101603
35 1 102280 101604
40 1 102281 101605
45 1 121998 121997
50 1 102282 101606
60 1 102283 101607
70 1 102284 101608
75 1 102285 101609
80 1 121996 121995
90 1 138887 138888
100 1 102286 101610
125 2 516991 516838
150 (see
Caution
below) 2 516993 516839
175 (see
Caution
below) 2 144883 144884
200 (see
Caution
below) 2 121831 121832
225 (see
Caution
below) 3 144885 144886
Order a Bullet Nose-Type Circuit Breaker/Fuseholder Mounting Assembly, P/N 513747, for every six circuit
breaker/fuseholder combinations ordered. Each bullet nose-type circuit breaker/fuseholder mounting
assembly requires six (6) distribution bus mounting positions.
See Table 9 for recommended load distribution wire sizes and lugs.
Circuit Breaker Alarm Operation:
1
Provides an alarm during an electrical trip condition only.
2
Provides an alarm during an electrical or manual trip condition.
Caution: An overcurrent protective device with a rating of 150 amperes or greater SHALL HAVE an
empty mounting position between it and any other overcurrent protective device within the
circuit breaker/fuseholder mounting assembly.
Table 3
Toggle –Handle Bullet Nose-Type Circuit Breakers and Bullet Nose-Type
Circuit Breaker/Fuseholder Mounting Assembly
Home