Application Guide

System Application Guide SAG582140000
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AW, June 3, 2014
Page 123 of 134
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
2) Algorithm #2: This source is used when the configuration of at least one
installed CAN I/O card is set to “Auxiliary” mode.
“Auxiliary” Mode Operation:
“Total Load Current” =
Sum of CAN I/O card analog input readings (only input readings of cards
configured for “Auxiliary” operation are summed),
+ LMS function channel 63 reading.
The reading displayed for the NPS system parameter “Total Auxiliary Load” is
derived from the sum of all analog input readings of CAN I/O cards configured for
“Auxiliary” mode operation
5. OPTIONAL LMS MONITORING SYSTEM
Refer to SAG586505000
Home