Application Guide
System Application Guide SAG582140000
Spec. No. 582140000 (Models 802
NLDB, 802NLEB and 802NL-B) Issue AW, June 3, 2014
Page 115 of 134
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
4.1.14 MCA Numbering Scheme: The MCA identifies (numbers) the components of the
system as follows.
COMPONENT
MCA IDENTIFICATION NUMBER
MCA NUMBERING
SCHEME (note
that each line
shown below is
separated with a
dash in the MCA
display)
NOTES EXAMPLE
MCA/Router
Bay #
Primary Bay is #1, other bays are numbered
consecutively, following the bay-to-bay
cabling scheme.
Primary Bay
1
Second Bay
2
Fifth Bay
5
Rectifier
(PCU)
Bay #
MCA Rectifier ID#
within the Bay / # of
Rectifiers Installed
in System
Main Power Bay is #1, other bays are
numbered consecutively, following the bay-
to-bay cabling scheme.
Rectifiers are identified from 1 to 10, as they
are powered-up and recognized by the
MCA.
Primary Bay, First
Recognized Rectifier (w/
36 rectifiers installed)
1-01/36
Second Bay, Third
Recognized Rectifier (w/
24 rectifiers installed)
2-03/24
Fifth Bay, Tenth
Recognized Rectifier (w/
12 rectifiers installed)
5-10/12
MCA Relay
Circuit Card
Bay #
Card Position #
w/in Bay
Relay # w/in Card
Primary Bay is #1, other bays are numbered
consecutively, following the bay-to-bay
cabling scheme.
Card #1 = left slot,
Card #7 = right slot.
Relay # (see illustration in System Overview
Chapter)
Primary Bay, Relay Card in
First Slot, Relay One on
Card
1-1-1
Second Bay, Relay Card in
Third Slot, Relay Four on
Card
2-3-4
Fifth Bay, Relay Card in
Seventh Slot, Relay Six on
Card
5-7-6
MCA I/O
Circuit Card
Bay #
Card Position #
w/in Bay
Primary Bay is #1, other bays are numbered
consecutively, following the bay-to-bay
cabling scheme.
Card #1 = left slot,
Card #7 = right slot.
Primary Bay, I/O Card in
First Slot
1-1
Second Bay, I/O Card in
Third Slot
2-3
Fifth Bay, I/O Card in
Seventh Slot
5-7
Home