Application Guide

ManualsBrandsEmerson ManualsDC PowerEmerson NetSure 802 DC Power System

SAG582140000

System Application Guide

Spec. No. 582140000 (Models 802

NLDB, 802NLEB and 802NL-B)

Issue AW, June 3, 2014

Page 1 of 134

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

SYSTEM OVERVIEW

Description: -48V DC @ up to 10,000 amperes power system.

This power system is designed to power a load while charging a positive grounded

battery. This power system is capable of operating in a batteryless installation or off

battery for maintenance purposes. This power system is designed for operation with the

positive output grounded.

The NetSure™ 802

NLDB (208V Input Power/Distribution and Power Only Bays), 802NLEB

(480V Input Power/Distribution and Power Only Bays), and 802

NL-B (Distribution Only

Bay) DC Power System is a complete integrated power system containing rectifiers,

intelligent control, metering, monitoring, and distribution. This power system consists of

the following components.

• Power/Distribution Bays

The system can consist of one (1) Primary Power/Distribution Bay and up to nine (9)

Secondary Power/Distribution Bays.

Each Power/Distribution Bay can be equipped with up to ten (10) Rectifiers and

provides distribution. Distribution is divided into two buses which accept a choice of

fuse and circuit breaker types and sizes.

Each Power/Distribution Bay contains a Monitor and Control Panel. In the Primary

Power/Distribution Bay, this panel houses the Meter-Control-Alarm (MCA) assembly.

This panel in the Primary Power/Distribution Bay also houses the optional LMS Main

CPU circuit card of the integrated LMS Monitoring System. In a Secondary

Power/Distribution Bay, this panel can be equipped with an optional LMS Expansion

CPU circuit card. (The optional LMS

Monitoring System provides a higher

level of monitoring and controlling

capabilities to the power system.)

The Monitor and Control Panel in

both Primary and Secondary

Power/Distribution Bays contain a

seven-slot card cage to house MCA

alarm relay circuit cards, MCA

input/output (I/O) circuit cards, and

optional LMS I/O circuit cards. (If a

Secondary Power/Distribution Bay is

to be equipped with optional LMS I/O

circuit cards, it must also be

equipped with an LMS Expansion

CPU circuit card.)

• Power Only Bays

The system can consist of one (1)

Primary Power Only Bay and up to

nine (9) Secondary Power Only

Bays.

Each Power Only Bay can be

equipped with up to ten (10)

Rectifiers.

Each Power Only Bay contains

a Monitor and Control Panel. In

the Primary Power Only Bay,

this panel houses the Meter-

Home

Primary

Power/Distribution Bay

Primary

Power Only Bay

Summary of content (134 pages)

PAGE 1
SAG582140000 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Issue AW, June 3, 2014 Home SYSTEM OVERVIEW Description: -48V DC @ up to 10,000 amperes power system. This power system is designed to power a load while charging a positive grounded battery. This power system is capable of operating in a batteryless installation or off battery for maintenance purposes. This power system is designed for operation with the positive output grounded.
PAGE 2
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Control-Alarm (MCA) assembly. This panel in the Primary Power Only Bay also houses the optional LMS Main CPU circuit card of the integrated LMS Monitoring System. In a Secondary Power Only Bay, this panel can be equipped with an optional LMS Expansion CPU circuit card.
PAGE 3
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Expansion Cabinets and LMS Expansion Assemblies are available that mount into customer equipment. The LMS Monitoring System is factory integrated within each Power/Distribution, Power Only, and Distribution Only Bay and requires no additional customer interconnections within the bays.
PAGE 4
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Family: Spec. No.
PAGE 5
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Power/Distribution Bay: Width: Depth: Height: Access: Single Bay Plants: Multi-Bay Plants: Power Only Bay: Width: Depth: Height: Access: Single Bay Plants: Multi-Bay Plants: Distribution Only Bay: Width: Depth: Height: Access: SAG582140000 Issue AW, June 3, 2014 Home 24”, plus 10” if PDSC used 30” 93.5” Lists 1 and 11, 84” Lists 2 and 12 Front Access for Installation, Maintenance, and Operation.
PAGE 6
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 7
System Application Guide Spec. No.
PAGE 8
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 582140000 Primary Power Only Bay List A: 480VAC Plant Input List B: 208VAC Plant Input List 3: Primary Power Only Bay (with Five [5] AC Feeds) List 4: Primary Power Only Bay (with Two [2] AC Feeds) Door removed in illustration for clarity.
PAGE 9
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 582140000 Secondary Power Only Bay List A: 480VAC Plant Input List B: 208VAC Plant Input List 13: Secondary Power Only Bay (with Five [5] AC Feeds) List 14: Secondary Power Only Bay (with Two [2] AC Feeds) Door removed in illustration for clarity.
PAGE 10
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 11
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 12
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) TABLE OF CONTENTS System Overview Picture List Descriptions Accessory Descriptions Specifications Physical Size Information Related Documentation SYSTEM OVERVIEW................................................................................................................................................. 1 582140000 Primary Power/Distribution Bay ..................................
PAGE 13
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 P/N 486534003, Rectifier (208VAC Input) ..................................................................................................... 32 External Main Termination Bars ...................................................................................................................... 33 Distribution Devices and Load Lug Locations - Power/Distribution Bays .......................
PAGE 14
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 3.4 Input Ratings (208VAC, with 486534003 Rectifier) ............................................................................... 106 3.5 Standard Features.................................................................................................................................. 107 4. MCA ...........................................................................................
PAGE 15
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home LIST DESCRIPTIONS List A: 480VAC Plant Input Voltage Features ♦ Specifies 480VAC Plant Input Voltage. List B: 208VAC Plant Input Voltage Features ♦ Specifies 208VAC Plant Input Voltage. List 1: Primary Power/Distribution Bay (Common Equipment) Features ♦ Provides common equipment for one (1) “power and distribution” bay rated for up to 2400 amperes. ♦ Mounted in a 93.
PAGE 16
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 11) Order internal ground busbar assembly, external top-mount battery input busbar assembly, busbar shield kit, external top-mount ground (load return) busbar assembly, and/or load return lug extension busbar assembly as required per the appropriate sections located under ACCESSORY DESCRIPTIONS.
PAGE 17
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 12) Order internal ground busbar assembly, external top-mount battery input busbar assembly, busbar shield kit, external top-mount ground (load return) busbar assembly, and/or load return lug extension busbar assembly as required per the appropriate sections located under ACCESSORY DESCRIPTIONS.
PAGE 18
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) List 4: Primary Power Only Bay, Two (2) AC Feeds (Common Equipment) Features Home ♦ Provides common equipment for one (1) power only bay rated for up to 2200 amperes. ♦ Mounted in a 7’0”H x 24"W x 30"D box framework. ♦ Provides ten (10) Rectifier mounting positions. ♦ Provides AC input circuit breakers rated for 22kA interrupting capacity for each rectifier position.
PAGE 19
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home ♦ Provides the MCA Assembly and Local MCA Control Panel. ♦ Provides mounting for optional LMS Main CPU circuit card. ♦ Provides a seven-slot card cage for mounting MCA customer alarm relay circuit cards, MCA I/O circuit cards, and/or optional LMS I/O circuit cards. Two (2) MCA customer alarm relay circuit cards provided. ♦ Expandable either left or right, cable connected.
PAGE 20
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Restrictions Maximum of nine (9) Secondary Power/Distribution Bays per power system. Ordering Notes 1) Specify List A (480VAC Input) or List B (208VAC Input). 2) Order Rectifiers as required per P/N 486532602 or P/N 486532603 (480VAC Input) or P/N 486534003 (208VAC Input).
PAGE 21
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Restrictions Requires List 30 (480VAC Input), List 31 (480VAC Input), or List 32 (208VAC Input) Bolt-On PDSC (AC Input 'Power Distribution Service Cabinet'). Maximum of nine (9) Secondary Power/Distribution Bays per power system. Ordering Notes 1) Specify List A (480VAC Input) or List B (208VAC Input).
PAGE 22
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) ♦ Provides a seven-slot card cage for mounting MCA customer alarm relay circuit cards, MCA I/O circuit cards, and/or optional LMS I/O circuit cards. ♦ MCA and LMS Network bay interconnect cables provided (Qty. 1 P/N 514643, Qty. 1 P/N 509900). Home ♦ Expandable either left or right, cable connected. Restrictions Maximum of nine (9) Secondary Power Only Bays per power system.
PAGE 23
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) ♦ SAG582140000 Issue AW, June 3, 2014 Expandable either left or right, cable connected. Home ♦ Surge suppression optional. Restrictions Maximum of nine (9) Secondary Power Only Bays per power system. Requires external main battery termination bars. Ordering Notes 1) Specify List A (480VAC Input) or List B (208VAC Input). 2) If List A specified, order ten (10) P/N 256933200 30A circuit breakers.
PAGE 24
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Restrictions Maximum of nine (9) Secondary Power Only Bays per power system. Requires external main battery termination bars. Ordering Notes 1) Specify List A (480VAC Input) or List B (208VAC Input). 2) Order Rectifiers as required per P/N 486532602 or P/N 486532603 (480VAC Input) or P/N 486534003 (208VAC Input).
PAGE 25
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 5) Order DC input cable lugs as required per Distribution Only Bay DC Input Cable Sizes and Lugs Selection in the ACCESSORY DESCRIPTIONS section. 6) Order one (1) “Twenty-Four (24) Position Bullet-Nose Circuit Breaker/Fuse Panel” per Distribution Bay as required per List C. 7) If a different length MCA Network cable is required, order per Replacement/Additional MCA Network Cables.
PAGE 26
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Restrictions For use with List 30 or List 31 manufactured after 12/01/04 only. See Surge Protection in the SPECIFICATION section for additional ratings. Ordering Notes 1) Order if additional surge suppression is required. 2) A wire harness is factory connected to Form-C relay contacts located on each surge suppression assembly for remote monitoring.
PAGE 27
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home circuit card (separately ordered – See List 71). The MCA then provides alarm display messages and an audible alarm when a surge suppression assembly activates. Order a List 71 MCA I/O Circuit Card as required to provide MCA binary inputs for the surge suppression alarms. 3) Note that two (2) MCA customer alarm relay circuit cards are provided with the primary bay.
PAGE 28
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Restrictions The LMS Monitoring System Expansion CPU circuit cards are mounted in Secondary Power/Distribution and Power Only Bays (required only if LMS I/O circuit cards are to be installed in the same bay). Ordering Notes 1) Order the LMS Expansion CPU circuit card for Secondary Power/Distribution and Power Only Bays that are to be equipped with LMS I/O circuit cards.
PAGE 29
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 List 66: Interface Kit to a Vortex Power System without a DGU or LMS1000 Features ♦ Home Provides the following... LMS Dual MCA Interface Software Option P/N 526843 50’ LMS Dual MCA Option Cable LMS Dual MCA Interface Software Option enables the Spec. No. 582140000 Power System to be integrated with an existing Power System. Specifically, List 66 allows the MCA in Spec. No.
PAGE 30
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home List 71: MCA I/O Circuit Card P/N 524550 Features ♦ Provides 1 analog input, 1 analog output (for remote plant output current monitoring), and 4 binary inputs. ♦ Refer to the "Specifications" section of this document for further information. Plugs into any slot in 7-position card cage in Primary and Secondary Power/Distribution and Power Only Bays.
PAGE 31
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) List C: 24 Position Bullet-Nose Circuit Breaker/Fuse Panel Features SAG582140000 Issue AW, June 3, 2014 Home ♦ Provides twenty-four (24) Bullet Nose Device positions. ♦ Accepts a choice of TLS/TPS-type fuseholders, Bullet Nose-Type circuit breakers, or Bullet Nose-Type GMT Fuse Modules.
PAGE 32
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home ACCESSORY DESCRIPTIONS Rectifiers P/N 486532602, Rectifier (480VAC Input) Features ♦ Consists of one (1) Model R48-11600 Rectifier, Spec. No. 486532602. Restrictions Each Power/Distribution and Power Only Bay holds up to ten Rectifiers. Ordering Notes 1) Order as required. P/N 486532603, Rectifier (480VAC Input) Features ♦ Consists of one (1) Model R48-12000e Rectifier, Spec. No.
PAGE 33
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home External Main Termination Bars Power Only Bays (Lists 3, 4, 5, 13, 14, and 15) and Distribution Only Bays (List 16) require external main battery termination bars. The following are standard sizes. Special requirements can be met with Emerson Services EA type bars. Shunts are not required because the load on a NetSure plant is internally calculated.
PAGE 34
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Distribution Devices and Load Lug Locations - Power/Distribution Bays Home Each Power/Distribution Bay has two (2) distribution buses. Each distribution bus has twenty-four (24) fuse/circuit breaker device mounting positions. Note that the various fuse/circuit breaker devices require different number of mounting positions, as detailed in the following sections.
PAGE 35
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 36
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Distribution Device and Load Lug Locations – Distribution Only Bays Home Each Distribution Bay has four (4) distribution buses. Each distribution bus has twelve (12) fuse/circuit breaker device mounting positions. Note that the various fuse/circuit breaker devices require different number of mounting positions, as detailed in the following sections.
PAGE 37
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Rear View Rear View Rear cover panels removed in illustration for clarity.
PAGE 38
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 1-Position Devices (Load Busbars with NO Lug Adapters Installed) (see Note 6) 3-Position Lug Adapter Kit P/N 529131 (see Notes 2, 3, 4, 5) 4-Position Lug Adapter Kit P/N 534420 (see Notes 2, 3, 4) 2-Position Lug Adapter Kit P/N 529132 (see Notes 1, 3, 4, 5) Notes: 1. Lug adapter accepts a maximum of (2) 750 kcmil or (4) 350 kcmil lugs. 2.
PAGE 39
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Distribution Devices See Distribution Devices and Load Lug Locations - Power/Distribution Bays and Distribution Device and Load Lug Locations – Distribution Only Bays at the beginning of this section for illustrations of distribution device and load lug mounting locations.
PAGE 40
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Ampere Rating 100 125 150 175 200 225 250 300 350 400 450 500 600 800 Required Distribution Bus Mounting Positions No.
PAGE 41
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Page 41 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
PAGE 42
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Page 42 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
PAGE 43
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home TPL Fuses and Fuseholder Assemblies Features ♦ Each fuseholder assembly is equipped with a shunt for MCA load current measurements. ♦ Bolts into bay's distribution device mounting positions. Load lug adapter plate provides 3/8" clearance holes on 1" centers for installation of customer provided two-hole lugs.
PAGE 44
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home TPL Fuse GMT-18/100A Alarm Fuse and GMT-X Safety Fuse Cover Fuseholder Assembly P/N 514403 Lug Adapter Kits Distribution Only Bays 3/8" Clearance Hole 1.000" Lug Adapter Kits Power/Distribution Bays 1.000" 3/8" Clearance Holes Lug Adapter P/N 513701, Kit P/N 520892 (see Notes 1, 2, 3) Load Lug Adapter Plate 2-Position Lug Adapter Kit P/N 529132 (see Notes 4, 6, 7, 8) Notes: 1.
PAGE 45
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home TPL Fuse GMT-18/100A Alarm Fuse and GMT-X Safety Fuse Cover Fuseholder Assembly P/N 514404 Lug Adapter Kits Distribution Only Bays Lug Adapter Kits Power/Distribution Bays 1.000" 1.000" 2.
PAGE 46
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Bullet Nose-Type Circuit Breakers and Bullet Nose-Type Circuit Breaker/Fuseholder Mounting Assembly – Power/Distribution Bays Features Home ♦ Each bullet nose-type circuit breaker/fuseholder mounting assembly can mount up to six (6) bullet nosetype circuit breakers and/or fuseholders.
PAGE 47
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 48
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 49
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 TLS/TPS Fuses, Bullet Nose-Type Fuseholders, and Bullet Nose-Type Circuit Breaker/Fuseholder Mounting Assembly – Power/Distribution Bays Features Home ♦ Each bullet nose-type circuit breaker/fuseholder mounting assembly can mount up to six (6) bullet nosetype circuit breakers and/or fuseholders.
PAGE 50
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 51
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home TLS/TPS Fuses Loosen (2) screws & lift retainer (removed here to show detail). Shorter side to the top. GMT-18/100A Alarm Fuse & GMT-X Safety Fuse Cover TLS/TPS Fuse Longer side to the bottom.
PAGE 52
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Bullet Nose-Type Circuit Breakers and Bullet Nose-Type Fuseholders e/w TLS/TPS Fuses – Distribution Only Bays Features Home ♦ Installs in the optional List C Fuse/Circuit Breaker Panel. ♦ Load lugs are connected to busbars provided on the List C Fuse/Circuit Breaker Panel. These busbars provide 1/4-20 threaded holes on 5/8" centers for installation of customer provided two-hole lugs.
PAGE 53
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Note: Load Leads are connected to load busbars. These busbars provide 1/4-20 threaded holes on 5/8” centers for installation of customer provided two-hole lugs. Customer must provide lug mounting bolts and additional hardware. Bolt length: 3/4”.
PAGE 54
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Optional Bullet Nose-Type 10-Position GMT Fuse Module for List C Features ♦ Installs in the optional List C Fuse/Circuit Breaker Panel. ♦ Provides 10 GMT fuse positions. (1/4A to 15A GMT Alarm-Type Fuses). ♦ Screw clamp type load and load return terminals provided. ♦ Includes ten dummy fuses equipped with safety fuse covers. ♦ Includes 35A input fuse and associate alarm fuse.
PAGE 55
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Replacement Alarm, Reference, and Control Fuses SAG582140000 Issue AW, June 3, 2014 Home Fuseblock Located in Bay’s Left Center Features Alarm, reference, and control fuses are located on the fuseblock mounted in the left center of the Power/ Distribution Bays, Power Only Bays, and Distribution Only Bays. These fuses are not available for customer connected loads.
PAGE 56
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home ASSEMBLY DESIG. F1 Power/Distribution Bays F2 F3 -F1 Power Only Bays F2 F3 -- TYPE PART NO.
PAGE 57
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Input and Alarm Fuse on Optional Bullet Nose-Type 10-Position GMT Fuse Module, P/N 509128 Features Home Located on the optional Bullet Nose-Type 10-Position GMT Fuse Module (P/N 509128) is an input fuse. If this fuse opens, an alarm type fuse also opens to activate the fuse alarm circuit. The alarm-type fuse is located in fuse position #11 on the Fuse Module.
PAGE 58
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Internal Ground Busbars Mounting Locations Internal Ground Busbar Assembly P/N 554862 Optional Internal Ground Busbar Kit (P/N 555214) Features ♦ Provides one (1) Internal Ground Busbar Kit, which mounts inside a Power/Distribution Bay between the two top distribution load busbars.
PAGE 59
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Restrictions FACTORY INSTALLED ONLY. Recommended for use with >300A distribution devices. Rated for 2000 amperes per busbar. All lugs for customer connections must be ordered separately. Customer needs to supply lug mounting bolts and hardware. Ordering Notes 1) Order Internal Ground Busbar Kit, P/N 555214, as required. 2) Factory to supply busbar mounting hardware as required.
PAGE 60
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Power/Distribution and Power Only Bays External Busbars Home Optional External Top-Mount Horizontal Battery Input Busbar Assembly Features ♦ Provides a battery input busbar assembly which mounts to the top of the bay. Provides horizontal lug landings for installation of customer provided two-hole lugs with 3/8" clearance holes on 1" centers. Restrictions Rated for 2000 amperes.
PAGE 61
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Optional Load Return Lug Extension Busbar Assembly Features ♦ Home Provides a load return lug extension busbar which mounts to an External Top-Mount Ground (Load Return) Busbar Assembly. ♦ Provides for installation of customer provided two-hole lugs with 3/8" clearance holes on 1" centers. Restrictions Rated for 1000 amperes.
PAGE 62
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 63
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 64
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home GROUND (LOAD RETURN) (see Detail B for hole size and spacing dimensions) Load Return Lug Expansion Busbar P/N 514543 Load Return Lug Expansion Busbar P/N 514543 5.
PAGE 65
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 11 Spaces at 2.00" centers = 22.000" 1.250" 0.437" Dia. (24) 1.000" Detail A Positive and Negative Battery Busbars Hole Size and Spacing Dimensions (for installation of customer provided two-hole lugs with 3/8" clearance holes on 1" centers) 1.000" 1.000" 0.437" Dia. (24) 11 Spaces at 2.00" centers = 22.
PAGE 66
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 26.37" 17.87" 11.62" Front Top of Bay 6.12" 6.67" 0.
PAGE 67
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Top View Expansion Bay Ground Bar Mounting P/N 514688 - 614689 Top View Expansion Bay Ground Bar Mounting P/N 514690 - 614691 Detail C (cont'd from previous page) Busbar Assemblies Mounted On Top of Power/Distribution Bay Page 67 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 68
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Optional External Top-Mount Vertical Battery Input Busbar Assembly Features Home ♦ Provides a battery input busbar assembly that mounts to the top of the bay. ♦ Provides vertical lug landings for installation of customer provided two-hole lugs with 3/8" clearance holes on 1" centers.
PAGE 69
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home External Top-Mount Vertical Battery Input Busbar Assembly, P/N 554874 VIEW WITH BUSBAR SHIELD REMOVED POSITIVE BATTERY (GROUND RETURN) (See Detail A for hole size and spacing dimensions.) NEGATI VE BATTERY (SUPPLY -48V) (See Detail B for hole size and spacing dimensions.
PAGE 70
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home External Top-Mount Vertical Battery Input Busbar Assembly, P/N 554874 11 Spaces at 2.00” centers = 22.000” 1.000” 0.406” Dia. (24) 1.000” 1.000” 1.000” 0.437” Dia. (22) 10 Spaces at 2.00” centers = 20.000” Detail A Positive Battery Busbar Hole Size and Spacing Dimensions (for installation of customer provided two-hole lugs with 3/8” clearance holes on 1” centers) 9 Spaces at 2.
PAGE 71
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home External Top-Mount Vertical Battery Input Busbar Assembly, P/N 554874 19.75” 14.87” 9.12” 5.45” Front Top of Bay 0.
PAGE 72
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Wiring Components Power/Distribution and Power Only Bays Frame Grounding Wire Sizes and Lugs Features ♦ Two sets of captive nuts (1/4-20 on 5/8" centers) are provided for installation of customer provided twohole lugs. ♦ For lug mounting hole size and spacing dimensions, refer to the illustration provided in this section.
PAGE 73
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Distribution Only Bay Frame Grounding Wire Sizes and Lugs Selection Features SAG582140000 Issue AW, June 3, 2014 Home 1/4” clearance holes on 5/8" centers are provided for installation of customer provided two-hole lugs, as shown in the following illustration. Restrictions All lugs for customer connections must be ordered separately. Customer needs to supply lug mounting bolts and hardware.
PAGE 74
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Power/Distribution Bay and Distribution Only Bay Load Distribution Wire Sizes and Lugs Features Home Load distribution leads are connected as described in the sections titled Distribution Devices and Load Lug Locations - Power/Distribution Bays and Distribution Device and Load Lug Locations – Distribution Only Bays under "Accessory Descriptions".
PAGE 75
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 76
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 77
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 78
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power/Distribution Bay Battery Cable Sizes and Lugs Features ♦ Studs (3/8-16 on 1" centers) are provided for installation of customer provided two-hole lugs. These studs are accessed from the rear of the each Power/Distribution Bay. (Overhead busbars may be furnished.
PAGE 79
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 2.000" POSITIVE BATTERY (GROUND RETURN) 1.000" 1.
PAGE 80
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power Only Bay DC Output Cable Sizes and Lugs Features ♦ Studs (3/8-16 on 1" centers) are provided for installation of customer provided two-hole lugs. These studs are accessed from the rear of the each Power Only Bay. (Overhead busbars may be furnished.
PAGE 81
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 2.000" POSITIVE BATTERY (GROUND RETURN) 1.000" 1.000" NEGATIVE BATTERY (SUPPLY -48V) 3/8-16 Stud (40) Rear View Power Only Bays Page 81 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc.
PAGE 82
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Distribution Only Bay DC Input Cable Sizes and Lugs Selection Features ♦ 3/8” clearance holes on 1" centers are provided for installation of customer provided DC input cables terminated in two-hole lugs. These are accessed from the rear of each Distribution Bay. ♦ For lug mounting hole size and spacing dimensions, refer to the illustration provided in this section.
PAGE 83
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 3/8" Clearance Hole (22) DC Input (Supply -48V) 2.031" 1.00" 1.00" 1.00" 1.00" 1.00" 1.00" 1.00" 1.00" Rear View Distribution Bay Page 83 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc.
PAGE 84
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power/Distribution Bay AC Input, Ten (10) AC Feeds Wire Sizes, Branch Circuit Protection, and Lugs Features ♦ Studs (1/4-20 on 5/8" centers) are provided for installation of customer provided two-hole AC Input lugs. ♦ Studs (1/4-20) are provided for installation of customer provided one-hole frame ground lugs.
PAGE 85
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 86
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power/Distribution Bay AC Input, Two (2) AC Feeds Wire Sizes, Branch Circuit Protection, and Lugs Features ♦ Studs (3/8-16 on 1" centers) are provided for installation of customer provided two-hole AC Input lugs. These studs are accessed from the rear of the PDSC (AC Input 'Power Distribution Service Cabinet').
PAGE 87
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 480VAC (List A) or 208VAC (List B), 3 Phase, 60Hz Two Feeds: Feed #1 Powers PCU #1, #3, #5, #7, #9 Feed #2 Powers PCU #2, #4, #6, #8, #10 Frame Ground Nuts to Secure Lugs and Lug Mounting Hardware Feed #1 Feed #1 Feed #1 (3/8-16 on 1" Centers) A B C (Accessed from Inside Cabinet) Feed #2 Feed #2 Feed #2 A B C 1.000" 3/8-16 x 1.25 Studs (12) 1.
PAGE 88
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power/Distribution Bay AC Input, One (1) AC Feed Wire Sizes, Branch Circuit Protection, and Lugs Features ♦ Studs (3/8-16 on 1" centers) are provided for installation of customer provided two-hole AC Input lugs. These studs are accessed from the rear of the PDSC (AC Input 'Power Distribution Service Cabinet').
PAGE 89
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Frame Ground Nuts to Secure Lugs and Lug Mounting Hardware (3/8-16 on 1" Centers) (Accessed from Inside Cabinet) 480VAC (List A) or 208VAC (List B), 3 Phase, 60Hz Single Feed A B C 1.000" 3/8-16 x 1.25 Studs (6) 3.686" 3.
PAGE 90
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power Only Bay AC Input, Five (5) AC Feeds Wire Sizes, Branch Circuit Protection, and Lugs Features ♦ Studs (3/8-16 on 1" centers) are provided for installation of customer provided two-hole AC Input lugs and frame ground lugs. ♦ For lug mounting hole size and spacing dimensions, refer to the illustration provided in this section.
PAGE 91
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 92
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power Only Bay AC Input, Two (2) AC Feeds Wire Sizes, Branch Circuit Protection, and Lugs Features ♦ Studs (3/8-16 on 1" centers) are provided for installation of customer provided two-hole AC Input lugs and frame ground lugs. ♦ For lug mounting hole size and spacing dimensions, refer to the illustration provided in this section.
PAGE 93
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 94
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Power Only Bay AC Input, Ten (10) AC Feeds Wire Sizes, Branch Circuit Protection, and Lugs Features ♦ Studs (1/4-20 on 5/8" centers) are provided for installation of customer provided two-hole AC Input lugs. ♦ Studs (1/4-20) are provided for installation of customer provided one-hole frame ground lugs.
PAGE 95
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 96
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) External Alarm, Reference, and Control Wire Sizes - Power/Distribution and Power Only Bays Features ♦ Home External Alarm, Reference, and Control connections are made to TB1 on the MCA circuit card and TB1 on the MCA Customer Alarm Relay Circuit Cards. Terminals Capacity Type 28 to 16 AWG Screw Clamp Recm Wire Size 22 AWG for Loop Lengths Up to 200 ft.
PAGE 97
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Optional Battery Charge Temperature Compensation Probe for Digital Compensation Features ♦ This system can be used with a Battery Charge Temperature Compensation Probe. This probe must be mounted near the battery to sense battery ambient temperature.
PAGE 98
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Replacement/Additional MCA Network Cable Home Features ♦ MCA bay-to-bay interconnect cable. Connects between bay expansion ports located on the bay's MCA (Primary Bay) and Router (Secondary Bays) circuit cards. ♦ Cable identification color is yellow. Restrictions Maximum combined cable length must not exceed 125 feet.
PAGE 99
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home SPECIFICATIONS 1. SYSTEM 1.1 DC Operating Voltage 1.1.1 Nominal: -48Vdc. 1.1.2 Range: -42Vdc to -60Vdc. 1.2 Environmental Ratings Note: See also ‘Environmental Ratings’ in the Rectifier Module section. 1.2.1 Operating Ambient Temperature Range: 0°C to +40°C (+32°F to +104°F). 1.2.2 Storage Ambient Temperature Range: -40°C to +65°C (-40°F to +149°F). 1.2.
PAGE 100
SAG582140000 Issue AW, June 3, 2014 1.2.6 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Heat Dissipation: With R48-12000e Rectifier(s) output adjusted to 54.48 volt DC at rated full load and nominal input voltage. Home R48-1200e Rectifier (P/N 486532603) 1.2.7 No.
PAGE 101
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 1.2.9 SAG582140000 Issue AW, June 3, 2014 Audible Noise: The audible noise does not exceed the following when measured at any point two feet from any vertical surface of a Power/Distribution Bay and five feet from the floor using a Sound Level Meter conforming to ANSI S1.4. No. of Rectifiers Audible Noise 1 10 65 dBA 75 dBA Home 1.2.10 1.3 1.
PAGE 102
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Indicator. The ID indicator illuminates Green when the component is OK, Red when the component has failed, and flashing yellow when the component is identified by the MCA. 1.4.3 "Distribution Bus" Indicators: Each distribution bus contains and indicator located on a hinged door panel covering the bus's MCA Monitoring circuit card.
PAGE 103
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home increases or decreases the output voltage as battery ambient temperature decreases or increases, respectively. Float voltage is factory set at approximately 54.48 volts at 25°C battery ambient. The float and test/equalize voltage range is the same as without battery charge temperature compensation.
PAGE 104
SAG582140000 Issue AW, June 3, 2014 3.2.4 Number of Rectifiers Installed System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Typical Input Data: 60 Hz input. (A) System output is initially adjusted to 54.48 volts DC as measured at the output bus at 50% of full load and nominal input. Nominal Input Voltage 1 480 Percent of Full Load Input Current (Amperes) Input VA Input Watts Power Factor Efficiency % 0 1.38 1143 170 0.149 -- 25 4.12 3420 3077 0.
PAGE 105
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home (C) Maximum input current at 100% of full load with output adjusted to 58 volts DC as measured at the output bus. Nominal Input Voltage Input Voltage 480 3.3 Number of Rectifiers Installed Input Current (Amperes) 1 17.83 2 35.67 3 53.50 4 71.34 408 5 89.17 6 107.00 7 124.84 8 142.67 9 160.51 10 178.34 Input Ratings (480VAC, with 486532603 Rectifier) 3.3.
PAGE 106
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home (B) Typical Efficiency versus Output Current: (C) Maximum input current at 100% of full load with output adjusted to 58 volts DC as measured at the output bus. Nominal Input Voltage 480 3.4 Input Voltage 408 Number of Rectifiers Installed Input Current (Amperes) 1 17.5 2 35.0 3 52.5 4 70.0 5 87.5 6 105.0 7 122.5 8 140.0 9 157.5 10 175.
PAGE 107
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 3.4.4 Number of Rectifiers Installed 1 Home Typical Input Data: 60 Hz input. (A) System output is initially adjusted to 54.48 volts DC as measured at the output bus at 50% of full load and nominal input. Nominal Input Voltage 208 Percent of Full Load Input Current (Amperes) Input VA Input Watts Power Factor Efficiency % 0 0.692 40.8 6.69 0.164 -- 25 8.196 2883 .2811 0.
PAGE 108
SAG582140000 Issue AW, June 3, 2014 3.5.3 3.5.4 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home The float voltage setting can be checked and/or adjusted without removing a Rectifier or affecting the load. One adjustment changes the output of all Rectifiers. Note: If the current demanded by the load exceeds the current limit setting of the system, the battery is required to furnish the difference in load current and begins discharging.
PAGE 109
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 3.5.5 3.5.6 SAG582140000 Issue AW, June 3, 2014 Home Input Protection: Lists 1 and 11 provide connections for up to ten AC input branch circuits, one per Rectifier mounting position. Customer to provide AC input branch circuit protection. Lists 2 and 12 must be used with a PDSC (AC Input 'Power Distribution Service Cabinet'). This cabinet provides connections for one or two AC input branch circuits.
PAGE 110
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Note: If the current limit setting is greater than the maximum allowable output current for the existing room ambient temperature, the current limit setting will automatically be reduced. Refer to the following figure. Local and external indications will be given. Warning: The Rectifier is rated for continuous operation at full output current up to +40°C (+104°F).
PAGE 111
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 3.5.7 3.5.8 3.5.9 3.5.10 3.5.11 3.5.12 3.5.13 3.5.14 SAG582140000 Issue AW, June 3, 2014 Home (3) Backup: If Rectifier output voltage exceeds a second (non-adjustable) value, the Rectifier shuts down and locks out regardless of load. Manual restart is then required. DC/DC Converter Failure: If a Rectifier's DC/DC converter fails, the Rectifier shuts down.
PAGE 112
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home 4. MCA 4.1 Standard Features 4.1.1 MCA Interface: You interface with the MCA locally via the MCA Control Panel located on the outside of the primary Power/Distribution Bay's front door. You can also interface with the MCA via the LMS, if furnished.
PAGE 113
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 4.1.6 4.1.7 4.1.8 4.1.9 4.1.10 4.1.11 SAG582140000 Issue AW, June 3, 2014 Home (K) Low Battery Ambient Temperature #2 Alarm (if battery charge digital temperature compensation probe installed): Adjustable from -49°C to +100°C. You disable the feature by selecting the setting below -49°C. Factory set to off, unless otherwise specified.
PAGE 114
SAG582140000 Issue AW, June 3, 2014 4.1.12 Local Controls: Refer to the "Operating Procedures" chapter in the Power System User Instructions (Section 5877) for a complete description. Location MCA Control Panel 4.1.13 System Application Guide Spec. No.
PAGE 115
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) 4.1.14 SAG582140000 Issue AW, June 3, 2014 MCA Numbering Scheme: The MCA identifies (numbers) the components of the system as follows.
PAGE 116
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 117
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home MCA IDENTIFICATION NUMBER COMPONENT MCA NUMBERING SCHEME (note that each line shown below is separated with a dash in the MCA display) Type Bay # Distribution Device (Distribution Only Bays) 4.1.15 Distribution Point # w/in Bay NOTES EXAMPLE Type = Breaker or Fuse. Primary Bay is #1, other bays are numbered consecutively, following the bay-to-bay cabling scheme.
PAGE 118
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) The User navigates Lines 3 and 4 of the MCA Display using the Keypad on the MCA Control Panel. (The following indicates the actual text shown on each line of Lines 3 and 4 of the MCA Display, Line 4 also displays applicable navigation key codes, see previous page for explanation of codes.
PAGE 119
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) from (Sheet 1 of 4) A FUNCTION MENU (cont'd on next page) 105 133 134 VIEW THE SYSTEM MEASUREMENTS FLOAT MODE IS ACTIVE SET TEST/EQ? or TEST/EQ MODE ACTIVE SET FLOAT? or TEST/EQUALIZE INPUT IS ACTIVE or TURN OFF POWER SHARE or TURN OFF ALTERNATE CURRENT LIMIT ROUTER VOLTAGE MENU MEASUREMENT MENU 106 SYSTEM OUTPUT SENSE vv.vvV (REM) or SYSTEM OUTPUT SENSE vv.
PAGE 120
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 121
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No.
PAGE 122
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home External Control Circuits (A) Remote Test/Equalize: All Rectifiers can be placed into the test/equalize mode by applying a loop closure signal. The Rectifiers operate in the float mode when the loop closure signal is absent. (B) Remote High Voltage Shutdown: The high voltage shutdown circuit on all Rectifiers, as described in Paragraph 3.4.
PAGE 123
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home 2) Algorithm #2: This source is used when the configuration of at least one installed CAN I/O card is set to “Auxiliary” mode. “Auxiliary” Mode Operation: “Total Load Current” = Sum of CAN I/O card analog input readings (only input readings of cards configured for “Auxiliary” operation are summed), + LMS function channel 63 reading.
PAGE 124
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) PHYSICAL SIZE INFORMATION Floor Hole Drilling Pattern Dimensions - Power/Distribution and Power Only Bays 0.750 X 2.000 SLOT (4 PLACES) 3/8-16 Floor Leveling Bolts 2.19 FRONT 19.62 24.00 Home 3.44 30.00 24.12 2.44 2.19 Page 124 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 125
System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) SAG582140000 Issue AW, June 3, 2014 Home Floor Hole Drilling Pattern Dimensions - Power/Distribution Bay w/ AC Input Service Cabinet AC POWER DISTRIBUTION SERVICE CABINET 0.750 X 2.000 SLOT (4 PLACES) POWER/ DISTRIBUTION BAY 3/8-16 Floor Leveling Bolts 2.11 5.63 9.85 2.11 3/8-16 Floor Leveling Bolts 2.19 19.62 24.00 0.750 X 2.000 SLOT (4 PLACES) 3.44 30.00 24.12 2.44 2.
PAGE 126
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Floor Hole Drilling Pattern Dimensions - Distribution Only Bay 3/8-16 Welded Nut (4) 31.375 27.625 25.875 23.250 19.500 26.625 19.500 24.000 30.000 25.375 3.063 1.750 1.875 2.750 4.063 5.937 0.812 Dia. (8 PLACES) Front Page 126 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 127
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Overall Dimensions Primary and Secondary Power/Distribution Bays (List 1 and 11) AC Input Wiring Access Opening(s) Choose either the supplied access plate with ten 3/4” conduit openings, or ten 1” conduit openings. 30.00 Notes: 1. All dimensions are in inches unless otherwise specified. 2. Weight in Lbs: Bay 746 Net: Shipping: 823 Rectifier 41 Net: Shipping: 53 3.
PAGE 128
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Overall Dimensions Primary and Secondary Power/Distribution Bays (List 2 and 12) 30.00 Notes: 1. All dimensions are in inches unless otherwise specified. 2. Weight in Lbs: Bay Net: 746 Shipping: 823 Rectifier Net: 41 Shipping: 53 3. Finish: Gray Top View 84.
PAGE 129
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Overall Dimensions – Optional PDSC (AC Input ‘Power Distribution Service Cabinet’) Notes: 1. All dimensions are in inches unless otherwise specified. 2. Weight in Lbs: Net: 215 Shipping: 292 3. Finish: Gray AC Input Wiring Access Opening(s) Choose either the supplied access plate with on 4” x 4” square opening, or two 3” diameter circular openings. 30.000 Top View 10.000 84.
PAGE 130
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Overall Dimensions - Primary and Secondary Power Only Bays 30.00 Notes: 1. All dimensions are in inches unless otherwise specified. 2. Weight in Lbs: Bay Net: Shipping: Rectifier Net: 41 Shipping: 53 3. Finish: Gray Top View 84.000 Left Side View Front View Right Side View Page 130 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 131
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Overall Dimensions –Distribution Only Bays 30.00 Notes: 1. All dimensions are in inches unless otherwise specified. 2. Weight in Lbs: Net: 916 Shipping: 972 3. Finish: Gray Top View 31.375 84.00 Left Side View Front View Right Side View Page 131 of 134 This document is property of Emerson Network Power, Energy Systems, North America, Inc.
PAGE 132
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home Overall Dimensions – Optional Battery Charge Digital Temperature Compensation Probes P/N 107021 (25 feet) and P/N 106824 (100 feet) 0.25 (6.35) DIA. 0.75 (19.05) 3.00 (76.2) 0.75 (19.05) 2.25 (57.15) 300 (7,620) or 1200 (30,480) 0.35 (8.89) NOTE: All dimensions are in inches and (millimeters).
PAGE 133
System Application Guide Spec. No.
PAGE 134
SAG582140000 Issue AW, June 3, 2014 System Application Guide Spec. No. 582140000 (Models 802NLDB, 802NLEB and 802NL-B) Home REVISION RECORD Issue Change Number (ECO) AQ LLP216553 AR LLP216994 AS LLP217269 AT LLP217720 AU LLP218775 AV LLP219853 AW LLP220105 Description of Change Date Added optional External Top-Mount Vertical Battery 1/26/12 Input Busbar Assembly, P/N 547999.