Application Guide

System Application Guide SAG582120600
Spec. No. 582120600 (Model 801DB
NVGB) Issue BF, February 21, 2014
Page 39 of 72
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Lugs for Use with Lists 115 and 125 Distribution Panels
(two hole, 1/4” bolt clearance hole on 5/8” centers)
Lead Size (AWG) P/N
8 245390200
6 245346700
4 245346800
2 245346900
1/0 245393500 (special lug)
2/0 245393600 (special lug)
3/0 245393700 (special lug)
4/0 245393800 (special lug)
250 kcmil 514872 (special lug)
350 kcmil 514873 (special lug)
3-Pole Device Special Adapter 545346
Lugs for Use with P/Ns 547991, 556377, and 556378 Lug Adapter Kits
(two hole, 3/8” bolt clearance holes on 1” centers)
Wire Size
Part Number
6 AWG 245349900
4 AWG 245350000
2 AWG 245348200
1/0 AWG 245347100
2/0 AWG 245347200
3/0 AWG 245347300
4/0 AWG 245347400
250 kcmil 245347500
300 kcmil 245347600
350 kcmil 245347700
400 kcmil 245347800
500 kcmil 245347900
600 kcmil 245348000
750 kcmil 245348100
For one-pole circuit breaker, cables larger than 2 AWG require an H-TAP connection.
For two-pole circuit breaker, use special lugs per table.
For three-pole circuit breaker and 3-pole ground/return, use either special lugs per
table with adapter P/N 545346, or adapter kit P/N 547991, 556377, or 556378 with
2-hole lugs having 3/8” clearance holes on 1” centers.
For fuseblock (P/N 117201), cables larger than 2 AWG require H-tap. Special lugs
listed above can be used but will use two positions of the distribution panel.
Table 7
Lugs for Use with Lists 115 and 125 Distribution Panels
Home