Application Guide

SAG582120600 System Application Guide
Issue BF, February 21, 2014 Spec. No. 582120600 (Model 801DB
NVGB)
Page 28 of 72
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Home
Right Angle Lug Adaptor Kits, P/Ns 556377 and 556378
Features
♦ These kits allow for load connections to the List 115, 116, 125, and 126 panels at right angle to the
standard connection and also allows for use of up to 4/0 AWG wire. The lug adapters are designed for
use with 2-hole lugs with 3/8” clearance holes on 1” centers. The lug adapters permit installation of
cables back to back.
♦ Part No. 556377 provides one (1) busbar P/N 555918, six (6) 1/4” flat washers P/N 214110100, six (6)
1/4” split lock washers P/N 215111100, and six (6) 1/4-20 hex nuts P/N 228557100.
♦ Part No.556378 provides one (1) busbar P/N 555919, six (6) 1/4” flat washers P/N 214110100, six (6)
1/4” split lock washers P/N 215111100, and six (6) 1/4-20 hex nuts P/N 228557100.
Restrictions
For use with lists 115,116,125 and 126.
For use with three-pole circuit breaker or 3-pole ground/return only.
Ordering Notes
1) Order as required. Refer to the following table.
Application for
Right Angle Adaptors
Left Side
(viewed from rear)
Right Side
(viewed from rear)
Top Feed Application P/N 556378 P/N 556377
Bottom Feed Application P/N 556377 P/N 556378
58212
0600 List 115
(some components
not shown for clarity only
)
5
82120600 List 115
P/
N 556377
Ri
ght A
ngle
Lug Adapte
r Kit
P/N 55637
7
Right Angle
Lug Adapter Kit
P/N 556378
Right
Ang
le
Lug Adapt
er Kit
P
/N 556378
Ri
ght
Angl
e
Lug Adap
ter
Kit
rear r
ear