Application Guide

SAG582120600 System Application Guide
Issue BF, February 21, 2014 Spec. No. 582120600 (Model 801DB
NVGB)
Page 22 of 72
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
List 166: Meter Panel Field Upgrade Retrofit Kit
Features
♦ Provides components to replace the standard meter panel in a List 107
bay with the Advanced Meter/Alarm Panel.
♦ Includes an Advanced Meter/Alarm Panel that provides the following
functions for each panel in the bay: voltage and current metering and
Low Voltage, Power Lost, Overcurrent, and Fuse/Circuit Breaker alarms.
Also provided are four (4) external alarm relay circuits, to which any
combination of alarms can be mapped.
♦ Provides four (4) fused auxiliary -48V power outputs (1-1/3A), fused
remote (A/B) meter panel inputs, internal/external sense option, and an
Ethernet connection (requires List 170 Ethernet option).
Restrictions
Upgrades List 107 only.
Original 50mV load shunts must be replaced with 25mV shunts. Six (6) 25mV
shunts (P/N 545619) are included in List 166.
Ordering Notes
1) Order one (1) List 166 to upgrade one (1) List 107.
2) For remote access capability, order one (1) List 170 Ethernet option.
3) For installation, contact Emerson Network Power Installation Services Group at 800-800-1280.
List 167: Pre-Installed Load Lug-Mounting Hardware
Features
♦ Provides all required 1/4” flat washers, 1/4” lock washers and 1/4-20 hex nuts for connecting
customer-furnished lugs to all Load distribution positions in a bay.
♦ If internal full-length ground/return bars (List 116 or 126) are ordered, List 167 will also
include all required ¼” lug-mounting hardware for all Load Return positions.
♦ Hardware is pre-installed on lug-landing studs.
Restrictions
Does not provide input lug hardware.
Does not provide lug hardware for panel length ground/return bars (List 117, 127).
Ordering Notes
1) Order one (1) List 167 to provide pre-installed hardware on all load distribution lug positions and all full-
length ground/return bar lug positions present in the bay you are ordering.
ESC ENT
SYSTEM OK
52.09V
1492A
A 52.09V 210A B 52.9V
Home