Application Guide

SAG582120600 System Application Guide
Issue BF, February 21, 2014 Spec. No. 582120600 (Model 801DB
NVGB)
Page 20 of 72
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
J1
J1
Adapter supplied with
panels E/W TPL fuses
List 148: 2400A Ground/Return Input Assembly, with Optional Bonding Strap
Features
♦ Provides additional landing points for ground/return
input leads (both sides) to the optional List 116 or 126
Internal Ground/Return Bar.
♦ Increases Ground/Return Bar rating from 1200A to
2400A.
♦ Each List 148 provides two (2) Input Lug Landing
Plate Assemblies (one per side).
♦ Included is an optional bonding strap for connecting
both Ground/Return Bars together for any current
requirement up to 2400A.
Restrictions
For use with List 116 and 126 Internal Ground/Return
Bars only.
Ordering Notes
1) List 116 and 126 internal return bars are rated for 1200 Amps. List 148 is available to increase that
capacity to 2400 Amps and provide additional cable landing points. Each bay can accommodate (1) List
148. List 148 offers cable termination at the rear of the bay and the option of a bonding strap. Mounting
location (top or bottom) of List 148 will be opposite that specified for the Input Lug Landing Plate
Assemblies of List 116 or 126.
2) Order input lugs as required per DC Input Cable Sizes and Lugs Selection under Wiring Notes in
ACCESSORY DESCRIPTIONS.
List 150: Optional Capacitor Precharge Assembly
Features
♦ Portable hand-held unit.
♦ Allows capacitors of a DC load to be
initially charged before a TLS/TPS or
TPL distribution fuse is inserted. This
prevents the fuse from possibly
blowing open as it is inserted due to
high capacitor charging current.
♦ Designed to plug directly into a
TLS/TPS type fuseholder case. An
adapter is supplied which plugs
directly into a TPL type fuseholder
case.
Restrictions
For Use with Lists 110 and 120 only.
Ordering Notes
1) Order as required.
Home